CHICAGO, IL —
OSHA Inspection: DELTA MAINTENANCE SOLUTIONS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DELTA MAINTENANCE SOLUTIONS LLC in 1855 N. SHEFFIELD RD., CHICAGO, IL 60614 (NAICS 236220). OSHA activity number 341546216.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DELTA MAINTENANCE SOLUTIONS LLC
- Site address
- 1855 N. SHEFFIELD RD.
- City
- CHICAGO
- State
- IL
- ZIP
- 60614
- Mailing
- 1 W. DUNDEE R. SUTIE 200, BUFFALO GROVE, IL 60089
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.304 F
- Issued
- Jul 28, 2016
- Abate by
- Aug 3, 2016
- Penalty
- Initial $2,400 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.304(f): Sections 4.1.2 (c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f) circular handfed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about June 13, 2016, the employer provided for employee use a Ryobi RTS10 table saw that was not equipped with non-kickback fingers or dogs to rip lumber. b) On or about June 13, 2016, the employer provided for employee use a Dewalt DW745 table saw that was not equipped with non-kickback fingers or dogs to rip lumber.
Recent events (2)
- — I (S) $1200
- — Z (S) $2400
1926.304 F
- Issued
- Jul 28, 2016
- Abate by
- Aug 3, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Sections 4.1.2 (b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f) circular handfed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about June 13, 2016, the employer provided for employee use a Ryobi RTS10 table saw was not equipped with a spreader when provided for employee use to rip lumber.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 I01
- Issued
- Jul 28, 2016
- Abate by
- Aug 3, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
23 CFR 1926.304(i)(1): Each circular hand-fed ripsaw was not guarded by a hood completely enclosing the portion of the saw above the table and the portion of the saw above the material being cut. a) On or about June 13, 2016, the employer provided for employee use a Ryobi RTS10 table saw that was not equipped with a blade guard to rip lumber. b) On or about June 13, 2016, the employer provided for employee use a Dewalt DW745 table saw that was not equipped with a blade guard to rip lumber.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1052 B01
- Issued
- Jul 28, 2016
- Abate by
- Aug 3, 2016
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.1052(b)(1): Where the treads and/or landings of pan stairs were to be filled in with concrete or other material at a later date, foot traffic was not prohibited on the stairway: a) On or about June 13, 2016, the employer did not fit the pan stairs with concrete or other materials prior to permitting the use of the stairways by employees working at the site.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.1052 C01 II
- Issued
- Jul 28, 2016
- Abate by
- Aug 3, 2016
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever was less, were not equipped with one stairrail system along each unprotected side or edge: a) On or about June 13, 2016, employees were using a stairway from the second floor to access a loft that was equipped with a stairrail system on only one side of the stairway leaving one side unprotected to a fall of approximately 11'-3" to the floor.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
More inspections at Delta Maintenance Solutions LLC
View Delta Maintenance Solutions LLC's full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341546216.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.