OSHA Inspection: CEDAR CREEK LLC

Issued

Jul 12, 2016

Abate by

Aug 5, 2016

Penalty

Initial $4,000 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven feet or less above floors or platforms were not enclosed:    a) Band resaw: On or about June 2, 2016, and at times prior, workers were exposed to amputation hazards where the sprockets and chain for upper band wheel adjustment were not guarded.      Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).

Issued

Jul 12, 2016

Abate by

Aug 19, 2016

Penalty

Initial $7,000 · Current $7,000

General-duty citation text

29 CFR 1910.265(e)(6)(i)(a): Cutting heads on planners were not guarded:      a) Planer-Sizer: On or about June 2, 2016, and at times prior, workers were exposed to amputation hazards while they performed routine operations such as, but not limited to operating, jointing, inspecting, and making adjustments to the Stetson Ross 4A4 planer-sizer with unguarded cutting heads.      Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).

Issued

Jul 12, 2016

Abate by

Jul 29, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.265(e)(6)(i)(c): Pressure feed rolls on planner(s) were not guarded:   a) Planer-Sizer: On or about June 2, 2016, and at times prior, workers were exposed to amputation hazards at the Stetson Ross 4A4 feed table where workers were exposed the an unguarded pressure feed roller.     Abatement Note: Abatement certification and documentation are required for this item (see enclosed Certification of Corrective Action Worksheet).

Issued

Jul 12, 2016

Abate by

Aug 26, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), and (c)(4)(ii)(C):     a) On or about June 2, 2016, and at times prior, workers were not specifically advised of information required to be included in lockout procedures such as but not limited to, scope, purpose, intended use and lock transfer.     Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).