WARRENTON, MO —
OSHA Inspection: J. V. MANUFACTURING, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of J. V. MANUFACTURING, INC. in 1035 ARMORY RD., WARRENTON, MO 63383 (NAICS 333319). OSHA activity number 341562908.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J. V. MANUFACTURING, INC.
- Site address
- 1035 ARMORY RD.
- City
- WARRENTON
- State
- MO
- ZIP
- 63383
- Mailing
- PO BOX 229, SPRINGDALE, AR 72765
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333319
- Employees
- 165
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C05 I
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: On 06/16/2016, J. V. Manufacturing, Inc. had not provided the hardware to effectively lock out the breakers feeding the Baler. Without the breakers being opened and effectively locked out, an employee could and did receive an electrical shock.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.147 C06 I
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: On 06/16/2016, J. V. Manufacturing, Inc. failed to conduct an at least annual periodic inspection for the installer. The last training was dated 12/4/2014.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.147 C07 I
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: On 06/16/2016, J. V. Manufacturing, Inc. had not provided training to gain the knowledge and skills required in the field installation work. An employee received an electric shock which affected his body and his heart.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.147 C08
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.147(c)(8): Energy isolation. Lockout or tagout shall be performed only by the authorized employees who are performing the servicing or maintenance: On 06/16/2016, J. V. Manufacturing, Inc. had an employee from another company try to disconnect electrical power to the Baler which was to be removed. J. V. Manufacturing did not perform the LO/TO process.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.147 D03
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): On 06/16/2016, J. V. Manufacturing, Inc. had an employee from another company try to disconnect electrical power to the Baler which was to be removed. J. V. Manufacturing did not physically locate and perform the LO/TO process to isolate the electrical power.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D06
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.147(d)(6): Verification of isolation. Prior to starting work on machines or equipment that have been locked out or tagged out, the authorized employee shall verify that isolation and deenergization of the machine or equipment have been accomplished: On 06/16/2016, J. V. Manufacturing, Inc. had not provided a meter to effectively check for the disconnecting of electrical equipment. The assigned vehicle was not provided with nor was the employee given a meter to test with on this job.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.333 B02 IV B
- Issued
- Jun 30, 2016
- Abate by
- Aug 17, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.333(b)(2)(iv)(B): A qualified person shall use test equipment to test the circuit elements and electrical parts of equipment to which employees will be exposed and shall verify that the circuit elements and equipment parts are deenergized. The test shall also determine if any energized condition exists as a result of inadvertently induced voltage or unrelated voltage backfeed even though specific parts of the circuit have been deenergized and presumed to be safe: On 06/16/2016, J. V. Manufacturing, Inc. had not provided a meter to effectively check for the disconnecting of electrical equipment. The assigned vehicle was not provided with nor was the employee given a meter to test with on this job.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at J. V. Manufacturing, INC.
View J. V. Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333319)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341562908.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.