OSHA Inspection: A.T.E.C. BUILDERS, LLC

Issued

Oct 11, 2016

Abate by

Nov 18, 2016

Penalty

Initial $400 · Current $400

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  On July 25, 2016, A.T.E.C. Builders, LLC was issued citations and the employer did not verify, through written certification that each citation was abated.  Abatement certification was not received for the following violations:              Citation 1 Item 3a & b

Issued

Oct 11, 2016

Abate by

Nov 18, 2016

Penalty

Initial $400 · Current $400

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:   On July 25, 2016, A.T.E.C. Builders, LLC was issued citations and the employer did not verify, through documents that each citation was abated.  Abatement documentation was not received for the following violations:              a. Citation 1 Item 1a - c and,         b. Citation 1 Item 2

Issued

Jul 25, 2016

Abate by

Aug 4, 2016

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:    On or about, June 29, 2016 employees were exposed to fall hazards and eye injuries while performing construction work and the employer did not maintain an accident prevention program.

Issued

Jul 25, 2016

Abate by

Aug 4, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.20(b)(2): The employer did not provide frequent and regular inspections of the job site, materials, and equipment by a competent person:    On or about, June 29, 2016 employees were exposed to fall hazards and eye injuries while performing construction work and a competent person had not performed frequent and regular safety inspections of the construction site to identify and eliminate the hazards.

Issued

Jul 25, 2016

Abate by

Aug 4, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.102(a)(1): Eye and face protective equipment was not used when machines or operations presented potential eye or face injury:                                                            On or about, June 29, 2016, employees were operating a pneumatic nail gun installing sheathing and the employer did not ensure the employee wore safety glasses while operating the nail gun.

Issued

Jul 25, 2016

Abate by

Aug 4, 2016

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.501(b)(13): Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were other provisions of paragraph (b) of this section used to provide an alternative fall protection measure:      On or about, June 29, 2016, employees were exposed to a fall hazard up to 17 feet while installing sheathing on a residential roof and a suitable fall protection system was not used.

Issued

Jul 25, 2016

Abate by

Aug 4, 2016

Penalty

Initial $2,400 · Current $2,400

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and  the ladder side rails did not extend at least 3 feet (0.9 m) above the upper landing surface to which the ladder was used to gain access:    On or about, June 29, 2016, employees were exposed to a fall hazard when using a ladder to ascend and descend from the truss web and top plate and the side rails did not extend at least 3 feet above the landing surface.

Issued

Jul 25, 2016

Abate by

Aug 4, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:   On or about, June 29, 2016, employees were exposed to a fall hazard up to 8 feet when using a ladder to ascend and descend the truss web and the top plate and the top step of the stepladder was used as a step.