Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,473Inspections Most recent open 2026-07-28 Last loaded 2026-07-31

OSHA Inspection: NAUTICAL FURNISHINGS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of NAUTICAL FURNISHINGS, LLC in 3111 W. MCNAB ROAD, POMPANO BEACH, FL 33069 (NAICS 337122). OSHA activity number 341609774.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Nautical Furnishings, LLC — free Get an email when a new federal OSHA severe-injury report for Nautical Furnishings, LLC is published. One employer, no account, unsubscribe in one click.
Site address
3111 W. MCNAB ROAD
City
POMPANO BEACH
State
FL
ZIP
33069
Mailing
60 NW 60TH STREET, FORT LAUDERDALE, FL 33309
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337122
Employees
30
Ownership type
A

2 citations on file for this inspection.

1910.213 C01

Repeat Gravity 5 1 instance 7 exposed
Issued
Oct 3, 2016
Abate by
Oct 14, 2016
Penalty
Initial $13,718 · Current $13,718
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  On or about June 29, 2016, at the above addressed jobsite, employees were operating a sliding table saw (circular hand-fed ripsaw), which was not equipped with an operable hood/guard, to cut material such as but not limited to; Styrofoam, cardboard, plywood and other pieces of material/lumber, which were then used to make furniture, therefore exposing the employees to amputation hazards.  REPEAT: Nautical Furnishings, LLC was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.213(d)(1), or its equivalent standard, which was contained in OSHA inspection number 692138, citation number 01, Item number 001, and was affirmed as a final order on 12/21/2012 with respect to a workplace located at 3111 W. McNab Road, Pompano Beach, Florida.
Recent events (1)
  • — Z (R) $13718

1910.213 C02

Repeat Gravity 5 1 instance 7 exposed
Issued
Oct 3, 2016
Abate by
Oct 14, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:  On or about June 29, 2016, at the above addressed jobsite, employees were operating a sliding table saw (circular hand-fed ripsaw), which was not equipped with a spreader, to cut material such as but not limited to; Styrofoam, cardboard, plywood and other pieces of material/lumber, which were then used to make furniture, therefore exposing the employees to amputation hazards.  REPEAT: Nautical Furnishings, LLC was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.213(d)(1), or its equivalent standard, which was contained in OSHA inspection number 692138, citation number 01, Item number 001, and was affirmed as a final order on 12/21/2012 with respect to a workplace located at 3111 W. McNab Road, Pompano Beach, Florida.
Recent events (1)
  • — Z (R) $0

View Nautical Furnishings, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341609774.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.