Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GILLESPIE CONTRACTING

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GILLESPIE CONTRACTING in 171 INDIAN RUN ROAD, GLENMOORE, PA 19343 (NAICS 236220). OSHA activity number 341633683.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Gillespie Contracting — free Get an email when a new federal OSHA severe-injury report for Gillespie Contracting is published. One employer, no account, unsubscribe in one click.
Site address
171 INDIAN RUN ROAD
City
GLENMOORE
State
PA
ZIP
19343
Mailing
171 INDIAN RUN ROAD, GLENMOORE, PA 19343
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
12
Ownership type
A

3 citations on file for this inspection.

1926.501 B11

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Sep 15, 2016
Abate by
Nov 2, 2016
Penalty
Initial $4,988 · Current $0 Reduced
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:  a) 720 Museum Road - Employee working on a 14-12 pitch slate roof with unprotected sides was not protected from falling approximately 12 feet to the ground below, thereby exposing employees to fall hazards on or about June 30, 2016.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4988

1926.451 G04 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 15, 2016
Abate by
Oct 12, 2016
Penalty
Initial $2,850 · Current $4,000
29 CFR 1926.451(g)(4)(iv): Midrails were not installed at a height approximately midway between the top edge of the guardrail system and the platform surface:    a) 720 Museum Road - Employer did not ensure that midrails were installed on the top walking or working area of the platform thereby, exposing employees to fall hazards of 12 feet to the ground below on or about:     Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $2850

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 15, 2016
Abate by
Oct 12, 2016
Penalty
Initial $2,850 · Current $4,000
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    a) Museum Road - The employer did not ensure that employees using a portable ladder to access the top of a two buck high scaffold approximately 12 feet tall was three feet above the upper landing surface and not secured, thereby exposing employees to fall hazards on or about June 30, 2016.     Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $2850

View Gillespie Contracting's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341633683.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.