Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TITAN MARINE, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of TITAN MARINE, LLC in 303 HARRISON STREET FORDYCE, FORDYCE, AR 71742 (NAICS 336612). OSHA activity number 341641561.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Titan Marine, LLC — free Get an email when a new federal OSHA severe-injury report for Titan Marine, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
TITAN MARINE, LLC
Site address
303 HARRISON STREET FORDYCE
City
FORDYCE
State
AR
ZIP
71742
Mailing
303 HARRISON STREET FORDYCE, FORDYCE, AR 71742
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336612
Employees
28
Ownership type
A

8 citations on file for this inspection.

1910.107 B05 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 28, 2016
Abate by
Oct 17, 2016
Penalty
Initial $1,607 · Current $964 Reduced
29 CFR 1910.107(b)(5)(i): The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.  On or about July 14, 2016; at the facility: The spray booth did not have visible gauges or alarms to ensure that at least 100 LFM or air flowed through the booth during spray painting operations.
Recent events (2)
  • — I (S) $964.2
  • — Z (S) $1607

1910.107 F01

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 28, 2016
Abate by
Oct 17, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.107(f)(1): Conformance. In sprinklered buildings, the automatic sprinkler system in rooms containing spray finishing operations shall conform to the requirements of 1910.159. In unsprinklered buildings where sprinklers are installed only to protect spraying areas, the installation shall conform to such standards insofar as they are applicable. Sprinkler heads shall be located so as to provide water distribution throughout the entire booth.  On or about July 14, 2016; at the facility: The spray booth was not protected from fire by a sprinkler system. The employer uses flammable chemicals such as Acetone in daily operations. This condition potentially exposes employees to burns in the event of fire.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 A

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 28, 2016
Abate by
Oct 17, 2016
Penalty
Initial $2,142 · Current $1,285 Reduced
29 CFR 1910.132(a): Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.  On or about July 14, 2016; at the facility: Employee was observed operating a forklift (Toyota, Model 8FGU25, SN 12113) without using the seat belt, which was installed on the vehicle. This hazard exposes the employees to accidents associated with falling out of the powered industrial truck.
Recent events (2)
  • — I (S) $1285.2
  • — Z (S) $2142

1910.178 L01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 28, 2016
Abate by
Oct 17, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  On or about July 14, 2016; at the facility: Employer failed to ensure employees were adequately trained in the operation of a powered industrial truck (Toyota, Model 8FGU25, SN # 12113); employees potentially exposed to broken bones and bruises from accidents in vehicle.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 B01

Serious Gravity 5 4 instances 10 exposed
Issued
Jul 28, 2016
Abate by
Aug 26, 2016
Penalty
Initial $2,142 · Current $1,285 Reduced
29 CFR 1910.303(b)(1): Examination. Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. Safety of equipment shall be determined using the following considerations:  The following electrical related hazards were found at the facility:  1. Faceplates missing in the office area;  2. Panel box with missing knockouts in the shop area;  3. Panel box not marked with voltage in the shop area;  4. Extension cord used in lieu of hard wiring near the paint booth area.
Recent events (2)
  • — I (S) $1285.2
  • — Z (S) $2142

1910.1200 E01

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 28, 2016
Abate by
Oct 17, 2016
Penalty
Initial $2,142 · Current $1,285 Reduced
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  On or about July 14, 2016; at the facility: For employees potentially exposed to chemicals such as, but not limited to: VM & P Naphtha and Acetone. Employees exposed to possible skin and respiratory tract irritation.
Recent events (2)
  • — I (S) $1285.2
  • — Z (S) $2142

1910.134 G01 I A

Other-than-serious 1 instance 3 exposed
Issued
Jul 28, 2016
Abate by
Oct 17, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(i)(A): Facial hair that comes between the sealing surface of the facepiece and the face or that interferes with valve function; or  On or about July 14, 2016; for employees required to wear half-mask respirators during spray painting operations with significant beard growth. Employees also have not been fit tested.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.212 A01

Other-than-serious 1 instance 5 exposed
Issued
Jul 28, 2016
Abate by
Aug 5, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc.  On or about July 14, 2016; in the shop area, near the loading dock doors: Guarding was not maintained for a box fan with 2" X 2" openings. Employees potentially exposed to finger injuries.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Titan Marine, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341641561.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.