Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MCALLEN METAL STAMPINGS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MCALLEN METAL STAMPINGS, INC. in 3500 WEST MILITARY HWY, MCALLEN, TX 78503 (NAICS 332116). OSHA activity number 341662781.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mcallen Metal Stampings, INC. — free Get an email when a new federal OSHA severe-injury report for Mcallen Metal Stampings, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3500 WEST MILITARY HWY
City
MCALLEN
State
TX
ZIP
78503
Mailing
3500 WEST MILITARY HWY, MCALLEN, TX 78503
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332116
Employees
8
Ownership type
A

6 citations on file for this inspection.

1910.178 Q01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2016
Abate by
Nov 30, 2016
Penalty
Initial $2,272 · Current $1,091 Reduced
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:    At this job site employee operating a power industrial truck in unsafe operating conditions such as but not limited to:     a. Seat belt missing  b. Non-functional horn
Recent events (2)
  • — I (S) $1091
  • — Z (S) $2272

1910.179 L03 III C

Serious Gravity 5 2 instances 2 exposed
Issued
Nov 2, 2016
Abate by
Nov 30, 2016
Penalty
Initial $1,817 · Current $727 Reduced
29 CFR 1910.179(l)(3)(iii)(c): All critical parts which were cracked, broken, bent, or excessively worn were not promptly repaired or replaced as needed for safe operation:      Employees operating overhead gantry crane with missing safety latch hooks exposing employer crush hazard.
Recent events (2)
  • — I (S) $727
  • — Z (S) $1817

1910.254 D09 III

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2016
Abate by
Nov 30, 2016
Penalty
Initial $2,272 · Current $1,091 Reduced
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replace:    Employees working in the warehouse area were using an arc welding machine with inadequate repairs on the cable for the lead, exposing employees electrical shock.
Recent events (2)
  • — I (S) $1091
  • — Z (S) $2272

1910.303 A

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2016
Abate by
Nov 30, 2016
Penalty
Initial $1,817 · Current $1,089 Reduced
29 CFR 1910.303(a): The conductors and/or equipment required or permitted by this subpart were not approved:       At the work site a employees used machinery which were (daisy chained) interconnected to extend length of outlet;     a) Power press   b) Coil machine
Recent events (2)
  • — I (S) $1089
  • — Z (S) $1817

1910.305 G01 IV A

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 2, 2016
Abate by
Nov 30, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:(   At the work site a employees used machinery which were connected with temporary flexible extension cords;   a) Power press  b) Coil machine
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 B02 I

Serious Gravity 5 3 instances 2 exposed
Issued
Nov 2, 2016
Abate by
Nov 30, 2016
Penalty
Initial $1,817 · Current $0 Reduced
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:      In the warehouse area, employees operation machinery missing covers on the outlet boxes  on the following:    a) High voltage press #8 in press area    b) Drill machine #1 in the work shop area  c) Drill machine #2 in the work shop area
Recent events (2)
  • — I (S) $0
  • — Z (S) $1817

View Mcallen Metal Stampings, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341662781.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.