Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DAKOTA SPECIALTY MILLING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DAKOTA SPECIALTY MILLING, INC. in 4014 15TH AVENUE NW, FARGO, ND 58102 (NAICS 424510). OSHA activity number 341669034.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dakota Specialty Milling, INC. — free Get an email when a new federal OSHA severe-injury report for Dakota Specialty Milling, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4014 15TH AVENUE NW
City
FARGO
State
ND
ZIP
58102
Mailing
4014 15TH AVENUE NW, FARGO, ND 58102
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424510
Employees
85
Ownership type
A

7 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2016
Abate by
Oct 15, 2016
Penalty
Initial $6,236 · Current $2,500 Reduced
Section 5(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees exposed to crushing and/or struck by hazards:      (a) On or about August 1, 2016 and at times prior, employees were exposed to crushing and/or struck by hazards while moving approximately two railcars on the plant no. 3 tracks with a payloarder and bucket at, 4014 15th Avenue NW, Fargo, North Dakota.      Abatement Note: Among other methods, one feasible and acceptable abatement method to correct this hazard would be to: 1. Utilize equipment designed to safely move railcars including, but not limited to, mobile railcar movers or railcar coupler attachments. 2. Conduct a hazard assessment of the work process. 3. Established and implemented safe procedures for the movement and placement of the railcars. 4. Trained employees in the safe procedures. 5. Utilized other engineering technology.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $6236

1910.146 D05 I

Serious Gravity 10 2 instances 2 exposed
Issued
Aug 16, 2016
Abate by
Oct 15, 2016
Penalty
Initial $8,730 · Current $4,000 Reduced
29 CFR 1910.146(d)(5)(i): The employer failed to test or adequately test conditions in the permit space to determine if acceptable entry conditions existed before entry was authorized to begin:      (a) On or about August 2, 2016 and at times prior to that date, for the employees exposed to potential health and/or physical hazards where the plant no. 3 elevator boot pit was entered for cleaning and other maintenance activities at 4014 15th Avenue NW, Fargo, North Dakota.      (b) On or about July 25, 2016 and at times prior to that date, for the employees exposed to potential health and/or physical hazards where the plant no. 1 elevator boot pit was entered for cleaning and other maintenance activities at 3301 12th Avenue North, Fargo, North Dakota.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $8730

1910.146 E01

Serious Gravity 10 2 instances 2 exposed
Issued
Aug 16, 2016
Abate by
Oct 15, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.146(e)(1): Before entry into a permit space was authorized, the employer did not document the completion of measures required by 29 CFR 1910.146(d)(3) by preparing an entry permit:      (a) On or about August 2, 2016 and at times prior to that date, for the employees exposed to potential health and/or physical hazards where the plant no. 3 elevator boot pit was entered for cleaning and other maintenance activities at 4014 15th Avenue NW, Fargo, North Dakota.      (b) On or about July 25, 2016 and at times prior to that date, for the employees exposed to potential health and/or physical hazards where the plant no. 1 elevator boot pit was entered for cleaning and other maintenance activities at 3301 12th Avenue North, Fargo, North Dakota.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 C02 I

Serious Gravity 5 2 instances 1 exposed
Issued
Aug 16, 2016
Abate by
Oct 15, 2016
Penalty
Initial $6,235 · Current $2,500 Reduced
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:    (a) On or about August 2, 2016 and at time prior to that date, for the employees exposed to caught-in hazards while operating the Nordyke & Marmon Co. reduction roll stand mill in plant no. 3 on the second floor located at 4014 15th Avenue NW, Fargo, North Dakota.      (b) On or about August 2, 2016 and at time prior to that date, for the employees exposed to caught-in hazards while operating the Forsberg Destoner, Model P-4R, Serial No. 18402 in plant no. 3 on the third floor located at 4014 15th Avenue NW, Fargo, North Dakota.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $6235

1910.219 D01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2016
Abate by
Oct 15, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.219(d)(1): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):    (a) On or about July 29, 2016 and at time prior to that date, for the employees exposed to caught-in and/or amputation hazards while accessing the work platform on the top bin in plant no. 7 where a fan motor was missing a cover located at 4014 15th Avenue NW, Fargo, North Dakota.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 E03 I

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 16, 2016
Abate by
Oct 15, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):    (a) On or about July 29, 2016 and at time prior to that date, for the employees exposed to caught-in and/or amputation hazards while accessing the work platform on the top bin in plant no. 7 where a fan motor was missing a cover located at 4014 15th Avenue NW, Fargo, North Dakota.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.36 B01

Serious Gravity 1 3 instances 1 exposed
Issued
Aug 16, 2016
Abate by
Dec 1, 2016
Penalty
Initial $3,742 · Current $1,000 Reduced
29 CFR 1910.36(b)(1): The employer did not provide at least two exit routes in a workplace to permit prompt evacuation of employees and other building occupants during an emergency:       (a) On or about July 20, 2016 and at times prior to that date, for the employees exposed to fire related hazards while performing maintenance work activities on top of the three Friesen hopper bins aligned north to south on the exterior of plant no. 3 located at 4014 15th Avenue NW, Fargo, North Dakota.       (b) On or about July 20, 2016 and at times prior to that date, for the employees exposed to fire related hazards while performing maintenance work activities on top of the five Meridian hopper bins aligned east to west on the exterior of plant no. 3 located at 4014 15th Avenue NW, Fargo, North Dakota.       (c) On or about July 21, 2016 and at times prior to that date, for the employees exposed to fire related hazards while performing maintenance work activities on top of the nine Meridian hopper bins aligned north to south on the exterior of plant no. 1 located at 3301 12th Avenue North, Fargo, North Dakota.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $3742

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341669034.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.