OSHA Inspection: ARTCHITECTURAL.COM 2 LLC

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $2,138 · Current $214 Reduced

General-duty citation text

29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6:     a) Iron Work Shop: On or about August 9, 2016, employee(s) in the metal shop were exposed to struck-by and high pressure system hazards from compressed gas cylinders that contained gases such as, but not limited to, Argon/Carbon Dioxide (75%/25%) and Helium,  that were unsecured.    b)Outdoor dock: On or about August 9, 2016, employee(s) on the outdoor dock of the iron shop were exposed to struck-by and high pressure system hazards from compressed gas cylinders that contained gases such as, but not limited to, Argon and Acetylene,   that were unsecured.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $2,138 · Current $214 Reduced

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:    Wood Work Shop: On or about August 9, 2016, employee(s) were exposed to struck-by and caught-in hazards from an unachored Delta Drill Press (Model FC 82A910) which was used for wood working processes.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $3,741 · Current $214 Reduced

General-duty citation text

29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:    Wood Work Shop: On or about August 9, 2016, employee(s) were exposed to a caught-in hazard while operating a Powermatic 10 inch Tilting Arbor Saw (Model 66) which was not equipped with a blade guard for the portion of the saw above the table and above the material being cut.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator:   Wood Work Shop: On or about August  9, 2016, employee(s) were exposed to a struck-by hazard while operating a Powermatic 10 inch Tilting Arbor Saw (Model 66) which was not equipped with a spreader.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator:  Wood Work Shop: On or about August 9, 2016, employee(s) were exposed to a struck-by hazard while operating a Powermatic 10 inch Tilting Arbor Saw which was not equipped with non kickback fingers or dogs.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $2,672 · Current $214 Reduced

General-duty citation text

29 CFR 1910.213(i)(1): Non-working portion(s) of the blade of bandsaw(s) were not enclosed or guarded:    Wood Work Shop: On or about August 9, 2016, and times prior thereto, employee(s) were exposed to caught-in hazards from the operation of a Northfield Foundry & Machine Co. 27 inch Bandsaw (SN: 502524-1) which was not equipped with a blade guard.

Issued

Oct 11, 2016

Abate by

Nov 3, 2016

Penalty

Initial $2,138 · Current $214 Reduced

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):    Wood Work Shop: On or about August 9, 2016, and times prior thereto, employee(s) were exposed to caught-in hazards from nip points on an unguarded motor belt on a Powermatic 10 inch Tilting Arbor Saw (Model 66) used for wood work.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $2,138 · Current $214 Reduced

General-duty citation text

29 CFR 1910.303(g)(1)(i)(A): Working space about electric equipment rated 600 volts, nominal, or less was not provided with the minimal depth in the direction of access to live parts as indicated in Table S-1:      a) Wood Work Shop, near entrance : On or about August 9, 2016, employee(s) were exposed to a fire hazard in the area directly in front of an electrical panel, which was obstructed by the storage of heavy wood working equipment and combustible materials, such as wooden scraps.    b) Wood Work Shop, center : On or about August 9, 2016, employee(s) were exposed to a fire hazard in the area directly in front of an electrical panel, which was obstructed by heavy wood working equipment and combustible materials, such as wooden scraps.

Issued

Oct 11, 2016

Abate by

Oct 24, 2016

Penalty

Initial $2,672 · Current $214 Reduced

General-duty citation text

29 CFR 1910.305(d)(2): Panel boards were not dead front:    a) Iron Work Shop, Left side: On or about August 9, 2016, employee(s) were exposed to electrical hazards from an electrical panel (Square D Company) on a column near the entrance of the Iron Work Shop, which did not have a dead front.    b) Metal Work Shop, Outdoor dock: On or about August 9, 2016, employee(s) were exposed to electrical hazards from an electrical panel (Square D Company) near the back wall of the dock which did not have a dead front and was not fully closed.    c) Metal Work Shop, Outdoor dock: On or about August 9, 2016, employee(s) were exposed to electrical hazards from an electrical panel (Square D Company, CN: NQODQ2) near the back wall of the dock which did not have a dead front.

Issued

Oct 11, 2016

Abate by

Oct 28, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(b)(1): Unused openings in boxes, cabinets, or fittings were not effectively closed:  Iron Work Shop, Left side: On or about August 9, 2016, employee(s) were exposed to electrical hazards from an electrical panel (Square D Company, Type NQOB) on a column near the entrance of the Iron Work Shop, which was not fully closed and was accessed to power iron working equipment.