Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SUNSET PRINTING & ENGRAVING CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SUNSET PRINTING & ENGRAVING CORPORATION in 10 KICE STREET, WHARTON, NJ 07885 (NAICS 323111). OSHA activity number 341702165.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Sunset Printing & Engraving Corporation — free Get an email when a new federal OSHA severe-injury report for Sunset Printing & Engraving Corporation is published. One employer, no account, unsubscribe in one click.
Site address
10 KICE STREET
City
WHARTON
State
NJ
ZIP
07885
Mailing
10 KICE STREET, WHARTON, NJ 07885
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
323111
Employees
36
Ownership type
A

6 citations on file for this inspection.

1910.37 B02

Serious Gravity 1 1 instance 6 exposed
Issued
Nov 3, 2016
Abate by
Nov 16, 2016
Penalty
Initial $3,741 · Current $3,900
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit".     a) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to fire hazards as the Exit door in the Shipping and Receiving Area were not marked as an Exit.    Violation was observed on or about 9/29/2016.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $3741

1910.151 C

Serious Gravity 5 5 instances 36 exposed
Issued
Nov 3, 2016
Abate by
Nov 16, 2016
Penalty
Initial $7,482 · Current $3,900 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use.    a) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to chemical hazards in the chemical storage room where the eyewash station provided had Fend-All Eyesaline eyewash solution that expired in March of 2007. Lot number for the solution was F04093-41.    Violation was observed on or about 8/16/2016.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $7482

1910.178 L01 I

Serious Gravity 5 1 instance 6 exposed
Issued
Nov 3, 2016
Abate by
Nov 16, 2016
Penalty
Initial $4,988 · Current $3,900 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).    a) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to struck by hazards as the powered industrial truck operator had not been trained and evaluated to operate the powered industrial trucks owned by this company.     Violation was observed on or about 8/16/2016.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $4988

1910.212 A01

Serious Gravity 10 3 instances 39 exposed
Issued
Nov 3, 2016
Abate by
Nov 16, 2016
Penalty
Initial $8,730 · Current $3,900 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.    a) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to caught in hazards as the Virkotype Process Machine, Model A12S, had open access 16 inches high to an unguarded drive chain and belt that were located just to the left of the controls for the machine's operations.     Violation was observed on or about 8/16/2016.    b) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to caught in hazards as the Potdevin Machine Company, 2R Gluer, had 12 inch rollers that were not protected from employee contact by a feed guard.    Violation was observed on or about 8/16/2016.    c) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to caught in hazards as the Brandtjen & Kluge Inc., EHD Series Foil Stamper, had no guard package in place with electric interlocks to prevent incidental employee contact with moving machine parts.    Violation was observed on or about 8/16/2016.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $8730

1910.1200 F06 II

Serious Gravity 5 11 instances 36 exposed
Issued
Nov 3, 2016
Abate by
Nov 16, 2016
Penalty
Initial $7,482 · Current $3,900 Reduced
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical.    a) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.    Employees were exposed to chemical hazards as the temporary containers used to store chemicals for use in the production areas of the facility were not properly labeled to identify the product contained therein and no associated warnings or cautions for those chemicals. One bottle was found to only have the word "Acetone" written on a piece of masking tape that was stuck to the bottle.    Violation was observed on or about 8/16/2016.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $7482

1910.1200 H01

Serious Gravity 5 2 instances 39 exposed
Issued
Nov 3, 2016
Abate by
Nov 16, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area.  a) Work site was located at 10 Kice Avenue, Wharton, NJ 07885.  Employees were exposed to chemical hazards as the company has no current Material Safety Data Sheets / Safety Data Sheets available for employees to review and employees are not trained in Hazard Communications / Global Harmonization Systems so that they understand the chemical hazards they are exposed to in the workplace.  Violation was observed on or about 8/16/2016.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Sunset Printing & Engraving Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341702165.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.