Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: TENNYSON SS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of TENNYSON SS, INC. in 2200 N. HENDERSON, GALESBURG, IL 61401 (NAICS 722511). OSHA activity number 341709095.

Watch Tennyson SS, INC. — free Get an email when a new federal OSHA severe-injury report for Tennyson SS, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
TENNYSON SS, INC.
Site address
2200 N. HENDERSON
City
GALESBURG
State
IL
ZIP
61401
Mailing
2200 N. HENDERSON, GALESBURG, IL 61401
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
722511
Employees
56
Ownership type
A

5 citations on file for this inspection.

1910.36 G02

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4988.00 · Current $750.00 Reduced
29 CFR 1910.36(g)(2): The exit access was not 28 inches wide:      On or about August 17 2016, employees were exposed trip and fall hazards because the aisle way was blocked due to the placement of boxes and storage tanks.
Recent events (2)
  • — I (S) $750
  • — Z (S) $4988

1910.101 B

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4988.00 · Current $750.00 Reduced
29 CFR 1910.101(b): The employer did not ensure in-plant handling, storage, and utilization of all compressed gases in cylinders were in accordance with Compressed Gas Association Pamphlet P-1-1965, Section 3.4.4 be sure the cylinder was properly supported to prevent it from being knocked over:    On or about August 17 2016, employees were exposed to hazards related to the storage of compressed gas cylinders and the cylinders were not properly supported to prevent them from being knocked over.
Recent events (2)
  • — I (S) $750
  • — Z (S) $4988

1910.212 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $8730.00 · Current $1800.00 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, and rotating parts:    On or about August 17 2016, employees were exposed to amputations and other injuries when operating the Hobart Floor Mixer in the bakery area and there was no guard installed to protect employees from the rotating parts.
Recent events (2)
  • — I (S) $1800
  • — Z (S) $8730

1910.303 B01 II

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $3741.00 · Current $750.00 Reduced
29 CFR 1910.303(b)(1)(ii): Mechanical strength and durability was not provided for parts designed to enclose and protect other equipment:    On or about August 17 2016, employees were exposed to electrical hazards because the cord used to provide electricity to the Hobart Mixer had insulation pulled away where the cord connected to the plug.
Recent events (2)
  • — I (S) $750
  • — Z (S) $3741

1910.303 G01

Serious Gravity 5 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $4988.00 · Current $750.00 Reduced
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:    On or about August 17 2016, employees were exposed hazards from boxes of food and storage containers blocking electrical panels and sufficient access and working space was not provided and maintained.
Recent events (2)
  • — I (S) $750
  • — Z (S) $4988

XEBEC

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341709095.