Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AMERICAN METAL FABRICATORS INC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of AMERICAN METAL FABRICATORS INC in 835 REMSEN AVE, BROOKLYN, NY 11236 (NAICS 238220). OSHA activity number 341710531.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch American Metal Fabricators INC — free Get an email when a new federal OSHA severe-injury report for American Metal Fabricators INC is published. One employer, no account, unsubscribe in one click.
Site address
835 REMSEN AVE
City
BROOKLYN
State
NY
ZIP
11236
Mailing
835 REMSEN AVE, BROOKLYN, NY 11236
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238220
Employees
3
Ownership type
A

4 citations on file for this inspection.

1910.132 H01

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 27, 2016
Abate by
Nov 8, 2016
Penalty
Initial $1,604 · Current $1,604
29 CFR 1910.132(h)(1): Except as provided by paragraphs (h)(2) through (h)(6) of this section, the protective equipment, including personal protective equipment (PPE), used to comply with this part, was not provided by the employer at no cost to employees.   a) On or about 8/18/16 at American Metal Fabricators Inc. employees were exposed to chemicals such as but not limited to hexane and toluene, and were not provided with a personal protective equipment at no cost.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $1604

1910.1200 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 27, 2016
Abate by
Nov 23, 2016
Penalty
Initial $1,604 · Current $1,604

Hazardous substances 13802460

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   a) On or about 8/18/16 at American Metal Fabricators Inc. employees were exposed to chemicals such as but not limited to hexane and toluene, and were not provided with a Hazard Communication Program.   NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $1604

1910.1200 G08

Serious Gravity 1 1 instance 1 exposed
Issued
Oct 27, 2016
Abate by
Nov 16, 2016
Penalty
Initial $0 · Current $0

Hazardous substances 13802460

29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s)  (a) On or about 8/19/16 at American Metal Fabricators Inc., employees performing metal fabricating operations were exposed to hazardous chemicals such as but not limited to hexane and toluene without being provided safety data sheets by the employer.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 27, 2016
Abate by
Nov 16, 2016
Penalty
Initial $0 · Current $0

Hazardous substances 13802460

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   (a) On or about 8/19/16 at American Metal Fabricators Inc., employees performing metal fabricating operations were exposed to hazardous chemicals such as but not limited to hexane and toluene without information and training from the employer.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $0

View American Metal Fabricators INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341710531.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.