EL PASO, TX —
OSHA Inspection: ALL PRO GRANITE & MARBLE
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ALL PRO GRANITE & MARBLE in 3625 GATEWAY BLVD. WEST, EL PASO, TX 79903 (NAICS 327991). OSHA activity number 341716652.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL PRO GRANITE & MARBLE
- Site address
- 3625 GATEWAY BLVD. WEST
- City
- EL PASO
- State
- TX
- ZIP
- 79903
- Mailing
- 3625 GATEWAY BLVD. WEST, EL PASO, TX 79903
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 A
- Issued
- Oct 24, 2016
- Abate by
- Jan 17, 2017
- Penalty
- Initial $2,672 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered On or about August 23, 2016, employees were not using personal protective equipment such as respirators, protective eye wear and hand protection when cutting and polishing the granite. The employer did not enforce the use of such personal protective equipment. This condition exposed employees to safety and health hazards.
Recent events (2)
- — I (S) $1850
- — Z (S) $2672
1910.243 C03
- Issued
- Oct 24, 2016
- Abate by
- Oct 28, 2016
- Penalty
- Initial $3,207 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder(s) (right angle head grinders) were not provided with safety guard: On or about August 23, 2016, employer did not ensure that guarding was installed on the portable grinder. This condition exposed employees to struck-by an amputation hazards.
Recent events (2)
- — I (O) $2250
- — Z (S) $3207
1910.334 A04
- Issued
- Oct 24, 2016
- Abate by
- Oct 28, 2016
- Penalty
- Initial $3,207 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.334(a)(4): Conductive work locations. Portable electric equipment and flexible cords used in highly conductive work locations (such a those inundated with water or other conductive liquids), or in job locations where employees are likely to contact water or conductive liquids,shall be approved for those locations. On or about August 23, 2016, employer did not ensure that the flexible cord was laid on a dry place. A portable grinder cord was connected to the flexible cord laying on a wet surface area. This condition exposed employee to electrical hazards.
Recent events (2)
- — I (O) $2250
- — Z (S) $3207
1910.157 C04
- Issued
- Oct 24, 2016
- Abate by
- Nov 3, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not kept in their designated places when not being used: On or about August 23, 2016, employer did not ensure that a portable fire extinguisher was properly mounted and readily accessible. This condition exposes employees to fire hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L01 I
- Issued
- Oct 24, 2016
- Abate by
- Nov 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): On or about August 23, 2016 the employer did not ensure that all forklift operators were certified, properly trained and evaluated in the operation of powered industrial trucks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at ALL PRO Granite & Marble
View ALL PRO Granite & Marble's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341716652.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.