FLOWERY BRANCH, GA —
OSHA Inspection: COLUMN CRAFTERS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COLUMN CRAFTERS in 4197 THURMON TANNER RD, FLOWERY BRANCH, GA 30542 (NAICS 238350). OSHA activity number 341725455.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COLUMN CRAFTERS
- Site address
- 4197 THURMON TANNER RD
- City
- FLOWERY BRANCH
- State
- GA
- ZIP
- 30542
- Mailing
- 4197 THURMON TANNER RD, FLOWERY BRANCH, GA 30542
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.242 A
- Issued
- Sep 29, 2016
- Penalty
- Initial $4,988 · Current $3,492 Reduced
General-duty citation text
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition: a) On or about August 25, 2016 and at times prior to, employees used nail guns (Brad nailers) that the safety latches were tied to the back, exposing the employees to struck-by injuries.
Recent events (2)
- — I (S) $3492
- — Z (S) $4988
1910.178 L02 II
- Issued
- Sep 29, 2016
- Abate by
- Nov 4, 2016
- Penalty
- Initial $3,563 · Current $2,494 Reduced
General-duty citation text
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace: a) On or about August 25, 2016 and at times prior to, the employer did not ensure that employees who operated Komatsu-25 forklift trucks moving pallets in the warehouse, had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace, exposing employees to struck-by and crush hazards.
Recent events (2)
- — I (S) $2494
- — Z (S) $3563
1910.1200 E01
- Issued
- Sep 29, 2016
- Abate by
- Nov 18, 2016
- Penalty
- Initial $3,563 · Current $2,494 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer had not developed or implemented a written hazard communication program which describes how the criteria in 29 CFR 1910.1200 (f), (g), and (h) will be met: a) On or about August 25, 2016 and at times prior to, an employee who changes empty propane cylinders on forklifts. The employer had not developed a written hazard communication program for the chemicals used by employees such as but not limited to liquid propane gas.
Recent events (2)
- — I (S) $2494
- — Z (S) $3563
1910.1200 H01
- Issued
- Sep 29, 2016
- Abate by
- Nov 18, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. a) On or about August 25, 2016 and at times prior to, an employee who changes empty propane cylinders on forklifts was not trained and provided effective information, exposing the employee to chemical hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 C04
- Issued
- Sep 29, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguisher was not kept in the designated place: a) On or about August 25, 2016 and at times prior to, a portable fire extinguisher was not mounted and maintained in a fully charged and operable condition on a Komasu-25 forklift truck, so that it was readily accessible to employees in case of fire emergency, exposing employees to possible injuries. Employees operate the forklift to move pallets in the warehouse.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Column Crafters
View Column Crafters's full OSHA safety record →
More inspections in this industry (NAICS 238350)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341725455.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.