DUNKIRK, NY —
OSHA Inspection: LAKESIDE PRECISION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LAKESIDE PRECISION INC. in 208 DOVE STREET, DUNKIRK, NY 14048 (NAICS 332710). OSHA activity number 341744035.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LAKESIDE PRECISION INC.
- Site address
- 208 DOVE STREET
- City
- DUNKIRK
- State
- NY
- ZIP
- 14048
- Mailing
- 208 DOVE STREET, DUNKIRK, NY 14048
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 20
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 A01
- Issued
- Sep 21, 2016
- Abate by
- Oct 24, 2016
- Penalty
- Initial $2,850 · Current $2,138 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment were not kept clean. a) On or about 08/31/16 in the Amada horizontal saw area; employees were exposed to fire and lacerations hazards when there was a coating of aluminum chips on the floor and on the horizontal band saw. b) On or about 08/31/16 in the chop saw area; employees were exposed to fire hazards when there was an accumulation of aluminum particles as deep as 2 inches on the top of the Rand-Bright brand wet vacuum system for chop saw. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2137.5
- — Z (S) $2850
1910.334 D
- Issued
- Sep 21, 2016
- Abate by
- Oct 24, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(d): Where flammable materials were present only occasionally, such as but not limited to flammable gases, vapors, or liquids; combustible dust; and ignitable fibers or flyings, electrical equipment capable of igniting them shall not be used. a) On or about 08/05/15 in the saw area; employees were exposed to a fire and explosion hazards when they used an ordinary small shop vacuum with an arcing electric motor to pick up particles of aluminum ( combustible material ) from the horizontal saw as well as floor areas. ABATEMENT CERTIFICATION REQURIED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Sep 21, 2016
- Abate by
- Oct 24, 2016
- Penalty
- Initial $2,138 · Current $1,604 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employee were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about 08/31/16 in the saw area; employees who use hazardous chemicals, such as but not limited to (acetone- flammable, aluminum - fire and explosion hazard) were not trained on the hazards of these materials, protective equipment to use or wear to avoid exposure and what actions to take in an emergency situation. ABATEMENT CERTIFICATION REQURIED
Recent events (2)
- — I (S) $1603.5
- — Z (S) $2138
More inspections at Lakeside Precision INC.
View Lakeside Precision INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341744035.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.