Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AIRAM STONE DESIGNS, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of AIRAM STONE DESIGNS, INC. in 12424 S.W 126 AVE., MIAMI, FL 33186 (NAICS 423320). OSHA activity number 341751741.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Airam Stone Designs, INC. — free Get an email when a new federal OSHA severe-injury report for Airam Stone Designs, INC. is published. One employer, no account, unsubscribe in one click.
Site address
12424 S.W 126 AVE.
City
MIAMI
State
FL
ZIP
33186
Mailing
7323 NW 46 ST, MIAMI, FL 33166
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423320
Employees
5
Ownership type
A

6 citations on file for this inspection.

1910.176 B

Serious Gravity 10 1 instance 6 exposed
Issued
Mar 2, 2017
Abate by
Apr 6, 2017
Penalty
Initial $12,675 · Current $8,874 Reduced
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse:    On or about September 3, 2016, at the above addressed job site, the employer did not ensure that A- frame storage racks were capable of supporting the load of the granite and marble slabs that were stacked on them, thereby exposing employees to struck-by/crushed-by hazards, in the event of an unexpected collapse of the storage racks.
Recent events (2)
  • — I (S) $8874
  • — Z (S) $12675

1910.178 L01 I

Serious Gravity 5 1 instance 6 exposed
Issued
Mar 2, 2017
Abate by
Apr 6, 2017
Penalty
Initial $3,622 · Current $2,535 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    On or about September 3, 2016, at the above addressed job site, the employer did not ensure that all employees who operated a powered industrial truck were trained in the safe operation of the forklift.
Recent events (2)
  • — I (S) $2535
  • — Z (S) $3622

1910.303 B02

Serious Gravity 5 1 instance 6 exposed
Issued
Mar 2, 2017
Abate by
Apr 6, 2017
Penalty
Initial $3,622 · Current $2,535 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    On or about September 3, 2016, at the above addressed job site, the employer did not ensure that all 110 VAC receptacles in areas where wet cutting and polishing occurred, were approved for use in a wet/damp location.
Recent events (2)
  • — I (S) $2535
  • — Z (S) $3622

1910.178 A04

Other-than-serious 1 instance 6 exposed
Issued
Mar 2, 2017
Abate by
Apr 6, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:    On or about September 3, 2016, at the above addressed job site, the employer did not ensure that a forklift front-end attachment which was used on a forklift to move stone slab products was  approved by the manufacturer or a qualified Registered Professional Engineer.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.178 A05

Other-than-serious 1 instance 6 exposed
Issued
Mar 2, 2017
Abate by
Apr 6, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:    On or about September 3, 2016, at the above addressed job site, the employer did not ensure that a forklift front-end attachment which was used on a forklift to move stone slab products was marked with its load capacity as required by the Standard.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.305 G01 IV A

Other-than-serious 1 instance 6 exposed
Issued
Mar 2, 2017
Abate by
Apr 6, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    On or about September 3, 2016, at the above addressed job site, the employer did not ensure that flexible cords supplying 110-VAC to equipment were not used as a substitute for fixed wiring.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Airam Stone Designs, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341751741.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.