GLEN CARBON, IL —
OSHA Inspection: ST. LOUIS PRESTRESS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ST. LOUIS PRESTRESS, INC. in 16 COMMERCIAL COURT, GLEN CARBON, IL 62034 (NAICS 238120). OSHA activity number 341756237.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ST. LOUIS PRESTRESS, INC.
- Site address
- 16 COMMERCIAL COURT
- City
- GLEN CARBON
- State
- IL
- ZIP
- 62034
- Mailing
- 16 COMMERCIAL COURT, GLEN CARBON, IL 62034
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 65
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.177 C01
- Issued
- Dec 1, 2016
- Abate by
- Dec 28, 2016
- Penalty
- Initial $6,236 · Current $3,742 Reduced
General-duty citation text
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels: a) The employer did not develop and implement a training program for Maintenance employees who service single-piece rim wheels.
Recent events (2)
- — I (S) $3741.5
- — Z (S) $6236
1910.177 C02
- Issued
- Dec 1, 2016
- Abate by
- Dec 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(c)(2): The employer did not assure that each employee demonstrated his ability to safely service rim wheels by effective performance of all tasks listed in 29 CFR 1910.177(c)(2)(i) through (viii): a)The employer did not assess the employees' ability to service rim wheels safely including but not limited to the use of a restraining barrier and an understanding of the necessity of standing outside the trajectory during inflation of the tire and during inspection of the rim wheel following inflation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.177 D02
- Issued
- Dec 1, 2016
- Abate by
- Dec 28, 2016
- Penalty
- Initial $8,730 · Current $5,238 Reduced
General-duty citation text
29 CFR 1910.177(d)(2): The employer did not provide a restraining device or a barrier to be used when inflating tires on single piece rim wheels which are not bolted onto the vehicles: a) The employer did not provide a restraining device for inflating single piece rim wheels, exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $5238
- — Z (S) $8730
1910.177 D04 I
- Issued
- Dec 1, 2016
- Abate by
- Dec 28, 2016
- Penalty
- Initial $8,730 · Current $5,238 Reduced
General-duty citation text
29 CFR 1910.177(d)(4)(i): The employer did not furnish an air line assembly which included a clip-on chuck for inflating tires on rim wheels: a) In the service shop, a dual foot extension air chuck was facilitated on a 1/2" remote air line in lieu of a clip-on-chuck to inflate a 11R22.5 tubeless tire and single rim wheel assembly. The hazard exposed employees to potential tire rupture.
Recent events (2)
- — I (S) $5238
- — Z (S) $8730
1910.177 D04 II
- Issued
- Dec 1, 2016
- Abate by
- Dec 28, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(4)(ii): The employer did not furnish an air line assembly which included an in-line valve with a pressure gauge or a presettable regulator for inflating tires on rim wheels: a) In the service shop, a 1/2" remote air line which lacked an inline pressure gauge was facilitated to inflate an 11R22.5 tubeless tire and single rim wheel assembly. The hazard exposed employees to potential tire rupture in the event of over-pressurization.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.177 G
- Issued
- Dec 1, 2016
- Abate by
- Dec 28, 2016
- Penalty
- Initial $6,236 · Current $3,742 Reduced
General-duty citation text
29 CFR 1910.177(g): The employer did not establish a safe operating procedure for servicing single piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(g)(1) through (12): a) The employer did not have a safe operating procedure for employees who service single piece rim wheels, in that employees inflated tires outside of a restraining device, while standing within the trajectory of the tires that they were inflating.
Recent events (2)
- — I (S) $3741.5
- — Z (S) $6236
More inspections at ST. Louis Prestress, INC.
View ST. Louis Prestress, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341756237.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.