Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CORBETT-STEEVES PATTERN WORKS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CORBETT-STEEVES PATTERN WORKS, INC. in 80 LOWELL STREET, ROCHESTER, NY 14605 (NAICS 331524). OSHA activity number 341760874.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Corbett-Steeves Pattern Works, INC. — free Get an email when a new federal OSHA severe-injury report for Corbett-Steeves Pattern Works, INC. is published. One employer, no account, unsubscribe in one click.
Site address
80 LOWELL STREET
City
ROCHESTER
State
NY
ZIP
14605
Mailing
80 LOWELL STREET, ROCHESTER, NY 14605
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331524
Employees
6
Ownership type
A

4 citations on file for this inspection.

1910.22 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 19, 2016
Abate by
Oct 20, 2016
Penalty
Initial $2,138 · Current $1,170 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly:     a) On or about 09/09/16 in the Grinding area; employees were exposed to a fire hazard when the exhaust duct for the 24 inch disc grinder was inoperable resulting in a layer of aluminum dust on the frame of the grinder and along the floor between the grinder and the east wall.      b) On or about 09/09/16 in the Grinding area; employees were exposed to fall hazards when the floor around the vertical band saw was covered with a layer of aluminum shavings, a pile of aluminum shavings near the saw, at least three stacks of plastic buckets, and three piles of parts stacked on the floor.      ABATEMENT CERTIFICATION REQURIED
Recent events (2)
  • — I (S) $1170
  • — Z (S) $2138

1910.24 F

Serious Gravity 5 2 instances 4 exposed
Issued
Sep 19, 2016
Abate by
Oct 20, 2016
Penalty
Initial $2,138 · Current $1,165 Reduced
29 CFR 1910.24(f): All treads were not reasonably slip-resistant and the nosings were not of nonslip finish:    a) On or about 09/09/16 in the east side of the Grinding area; employees were exposed to a fall hazard when the nosing at the top of the fixed stair and for each riser was worn.      b) On or about 09/09/16 in the east side of the Grinding area; employees were exposed to a fall hazard when the tread for each riser on the fixed stairs was oily and covered with metal particles.      ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1165
  • — Z (S) $2138

1910.24 H

Serious Gravity 1 1 instance 4 exposed
Issued
Sep 19, 2016
Abate by
Oct 20, 2016
Penalty
Initial $0 · Current $0
29 CFR 1910.24(h): Handrails were not provided on at least one side of closed stairways preferably on the right side descending:  a) On or about 09/09/16 in the east side of the Grinding area; employees were exposed to a fall hazard when there was no railing along the right side descending on the fixed wooden stairs.      ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 G01 IV A

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 19, 2016
Abate by
Oct 20, 2016
Penalty
Initial $2,138 · Current $1,165 Reduced
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    a) On or about 09/09/16 in the grinding table area; employees were exposed to contact with electrical current (120 volts AC) when a when a toggle switch, for each of the two over head florescent lights, was suspended from the fixtures by non protected conductors.        ABATEMENT CERTIFICATION REQURIED
Recent events (2)
  • — I (S) $1165
  • — Z (S) $2138

View Corbett-Steeves Pattern Works, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341760874.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.