OSHA Inspection: MORGAN PROPERTIES

Issued

Oct 13, 2016

Abate by

Nov 23, 2016

Penalty

Initial $1,604 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:      a) Throughout facility: The employer did not provide a medical evaluation to employees that were provided Honeywell  MC/P100 and Honeywell  N75001L  half face respirators when painting and cleaning with chemicals, on or about 9/15/16.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Oct 13, 2016

Abate by

Oct 19, 2016

Penalty

Initial $2,138 · Current $1,375 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):    a) Toledo maintenance department: A Craftsman table saw model 137.221940 used to cut items, such as, but not limited to, wood and pipes, did not have an adjustable guard over the blade, on or about 9/15/16.     NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Oct 13, 2016

Abate by

Oct 19, 2016

Penalty

Initial $2,138 · Current $1,375 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:      a) Toledo maintenance shop: The work rest on a Baldor bench grinder had an opening of 1 1/4 inches between the wheel periphery and work rest, on or about 9/15/16.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Oct 13, 2016

Abate by

Oct 19, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  a) Toledo maintenance shop: A Baldor bench grinder did not have a tongue guard and the distance between the wheel periphery and the safety guard measured one inch, on or about 9/15/16.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Oct 13, 2016

Abate by

Dec 15, 2016

Penalty

Initial $2,672 · Current $1,750 Reduced

General-duty citation text

29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical and health hazards of the chemicals in the work area:      a) Throughout facility: Employee training did not include the physical and health hazards for the chemicals used on site by employees, such as, but not limited to, Thrift Drain Cleaner, ZEP Calcium, Lime and Rust Remover and Enviro Coil, corrosive chemicals, Tilex, CLR, 409, and spray paints, on or about 9/15/15.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.

Issued

Oct 13, 2016

Abate by

Nov 8, 2016

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.141(a)(3)(i): Places of employment were not kept clean to the extent that the nature of the work allowed:  a) Toledo building south side stairwell: Mold was observed on the walls and back of the steps, on or about 9/14/16.   NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.