ANDERSON, MO —
OSHA Inspection: FAIRVIEW MILLS LLC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FAIRVIEW MILLS LLC. in 601 S. MILL STREET, ANDERSON, MO 64831 (NAICS 311111). OSHA activity number 341771244.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAIRVIEW MILLS LLC.
- Site address
- 601 S. MILL STREET
- City
- ANDERSON
- State
- MO
- ZIP
- 64831
- Mailing
- 604 NEMAHA ST, SENECA, KS 66538
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311111
- Employees
- 31
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 D01
- Issued
- Nov 28, 2016
- Abate by
- Dec 22, 2016
- Penalty
- Initial $11,224 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment: (a) On and before September 2, 2016, employees were exposed to serious injuries, in that the employer had not assessed the hazards in the Electrical Vault Room of the Mill Basement, to determine the use and types of PPE needed when employees are working on or near the 480 Volt Electrical Panels. As a result, an Arc Flash occurred seriously injuring the employee. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (3)
- — F (S) $0
- — C (S) $11224
- — Z (S) $11224
1910.333 B02 I
- Issued
- Nov 28, 2016
- Abate by
- Aug 12, 2017
- Penalty
- Initial $11,224 · Current $9,540 Reduced
General-duty citation text
29 CFR 1910.333(b)(2)(i): The employer did not make a written copy of the procedures outlined in paragraph (b)(2) of 29 CFR 1910.333 available for inspection by employees and by the Assistant Secretary of Labor and his or her authorized representatives: (a) On and before September 2, 2016, the employer had not developed written Lock Out Tag Out procedures for employees engaged in maintenance work tasks involving an Energized 480 Volt Electrical Panel, located in the Electrical Vault of the Mill Basemen. As a result, an Arc Flash occurred seriously injuring the employee. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (3)
- — F (S) $9540.4
- — C (S) $11224
- — Z (S) $11224
1910.333 B02 II B
- Issued
- Nov 28, 2016
- Abate by
- Aug 12, 2017
- Penalty
- Initial $11,224 · Current $9,540 Reduced
General-duty citation text
29 CFR 1910.333(b)(2)(ii)(B): Control circuit devices, such as push buttons, selector switches, and interlocks, were used as the sole means for deenergizing circuits and equipment: (a) On and before September 2, 2016, in the Electrical Vault Room of the Mill Basement, an employee was exposed to serious electrical hazards in that he did not use appropriate methods and procedures to de-energize a 480 volt electric panel while attempting to change out the electrical fuses. As a result, an Arc Flash occurred seriously injuring the employee. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (3)
- — F (S) $9540.4
- — C (S) $11224
- — Z (S) $11224
1910.335 A01 I
- Issued
- Nov 28, 2016
- Abate by
- Aug 12, 2017
- Penalty
- Initial $11,224 · Current $9,540 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not using electrical protective equipment that was appropriate for the specific parts of the body to be protected and for the work to be performed: (a) On and before September 2, 2016, in the Electrical Vault Room of the Mill Basement, an employee was exposed to serious electrical hazards in that he did not use Personnel Electrical Protective Equipment that was appropriate for the protection of his hands, arms, face and body, while attempting to change out the electrical fuses on an Energized 480 Volt Electrical Panel. As a result, an Arc Flash occurred seriously injuring the employee. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (3)
- — F (S) $9540.4
- — C (S) $11224
- — Z (S) $11224
More inspections at Fairview Mills LLC.
View Fairview Mills LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 311111)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341771244.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.