DES PLAINES, IL —
OSHA Inspection: VALENTINE GRIMALDO DBA GRIMALDO CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VALENTINE GRIMALDO DBA GRIMALDO CONSTRUCTION in 8662 GREGORY, DES PLAINES, IL 60016 (NAICS 238160). OSHA activity number 341812501.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VALENTINE GRIMALDO DBA GRIMALDO CONSTRUCTION
- Site address
- 8662 GREGORY
- City
- DES PLAINES
- State
- IL
- ZIP
- 60016
- Mailing
- 2707 N. ARTESIAN AVE., CHICAGO, IL 60647
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- Dec 15, 2016
- Abate by
- Jan 20, 2017
- Penalty
- Initial $300 · Current $300
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Valentine Grimaldo dba Grimaldo Construction, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 01 11/01/2016 01 02 11/01/2016 01 03 12/14/2016 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (1)
- — Z (O) $300
1926.501 B10
- Issued
- Oct 26, 2016
- Abate by
- Nov 1, 2016
- Penalty
- Initial $3,741 · Current $3,741
General-duty citation text
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system: a) Employees were exposed to the hazard of falling approximately 20 feet from the edge of the roof deck while engaged in roofing activities without the use of fall protection or a safety monitor. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- — Z (S) $3741
1926.502 J07 I
- Issued
- Oct 26, 2016
- Abate by
- Nov 1, 2016
- Penalty
- Initial $2,672 · Current $2,672
General-duty citation text
29 CFR 1926.502(j)(7)(i): Material and equipment were stored within 6 feet (1.8m) of a roof edge: a) Roofing materials were stored along the edge of the roof deck exposing employees to fall and struck by hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation.
Recent events (1)
- — Z (S) $2672
1926.503 A01
- Issued
- Oct 26, 2016
- Abate by
- Dec 14, 2016
- Penalty
- Initial $2,672 · Current $2,672
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) The employer did not provide training to enable employees to recognize the hazards of falling and the procedures to be followed to eliminate or control such hazards at the worksite. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $2672
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341812501.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.