UTICA, NY —
OSHA Inspection: DIVINE BROTHERS COMPANY
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of DIVINE BROTHERS COMPANY in 200 SEWARD AVE., UTICA, NY 13503 (NAICS 327910). OSHA activity number 341818623.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIVINE BROTHERS COMPANY
- Site address
- 200 SEWARD AVE.
- City
- UTICA
- State
- NY
- ZIP
- 13503
- Mailing
- 200 SEWARD AVE., UTICA, NY 13503
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327910
- Employees
- 75
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.101 B
- Issued
- Jan 23, 2017
- Penalty
- Initial $4,310 · Current $3,233 Reduced
General-duty citation text
29 CFR 1910.101(b): Section 3.4.4, Compressed Gas Association Pamphlet P11965, as adopted by 29 CFR 1910.101(b): Compressed gas cylinder(s) in use were not properly supported to prevent them from being knocked over: a) Maintenance Shop, on or about 10/5/16: Compressed gas cylinder, UN1956 was not secured to prevent the cylinder from being knocked over.
Recent events (2)
- — I (S) $3232.5
- — Z (S) $4310
1910.212 A01
- Issued
- Jan 23, 2017
- Penalty
- Initial $4,310 · Current $3,233 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created point of operation, rotating parts, and flying chips: a) Maintenance Room, on or about 10/5/16: Central Machinery Drill Press was not provided with a chuck and tool guard.
Recent events (2)
- — I (S) $3232.5
- — Z (S) $4310
1910.219 D01
- Issued
- Jan 23, 2017
- Penalty
- Initial $4,310 · Current $3,233 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Maintenance Area, on or about 10/5/16: The Turret Milling Machine was not provided with a guard over the in-running nip points of the belt and pulley drive.
Recent events (2)
- — I (S) $3232.5
- — Z (S) $4310
1910.219 E01
- Issued
- Jan 23, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): a) Maintenance Area, on or about 10/5/16: Turret Milling Machine was not provided with a guard over the in-running nip points of the belt and pulley drive.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.334 D
- Issued
- Jan 23, 2017
- Abate by
- Feb 15, 2017
- Penalty
- Initial $3,802 · Current $2,852 Reduced
General-duty citation text
29 CFR 1910.334(d): Where flammable materials were present only occasionally, such as but not limited to flammable gases, vapors, or liquids; combustible dust; and ignitable fibers or flyings, electrical equipment capable of igniting them shall not be used: a) Compressor Room, on or about 10/5/16: Rubbermaid Backpack Vacuum Cleaner Model No. 9VBP-10 was used to vacuum combustible dust on top of sprinklers; pipes; machines and breaker boxes. Rubbermaid Vacuum Cleaner was not intended to be used with combustible materials.
Recent events (2)
- — I (S) $2851.5
- — Z (S) $3802
More inspections at Divine Brothers Company
View Divine Brothers Company's full OSHA safety record →
More inspections in this industry (NAICS 327910)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341818623.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.