Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MID-AMERICAN TOOL, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of MID-AMERICAN TOOL, INC. in 3642 W. 128TH PLACE, ALSIP, IL 60803 (NAICS 493110). OSHA activity number 341822187.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mid-American Tool, INC. — free Get an email when a new federal OSHA severe-injury report for Mid-American Tool, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3642 W. 128TH PLACE
City
ALSIP
State
IL
ZIP
60803
Mailing
3642 W. 128TH PLACE, ALSIP, IL 60803
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
493110
Employees
11
Ownership type
A

8 citations on file for this inspection.

1910.23 C01

Serious Gravity 5 2 instances 2 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $2,850 · Current $998 Reduced
29 CFR 1910.23(c)(1): Every open-sided floor or platform 4 feet or more above adjacent floor or ground level shall be guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder. The railing shall be provided with a toeboard wherever, beneath the open sides,     a. On or about October 27, 2016, in the warehouse area, employees were required to access the top of the office to store various products.   There was no standard railing to protect employees from falling approximately 8 feet. Employees were thereby exposed to the hazards associated with falls.    b. On or about October 27, 2016, in the warehouse, employees were required to use the Ballymore lift to access stock on the shelves.  The standard railings on the lift were missing and/or inadequate to protect employees from falling approximately 8 feet.  Employees were thereby exposed to the hazards associated with falls.
Recent events (2)
  • — I (S) $997.5
  • — Z (S) $2850

1910.176 B

Serious Gravity 1 1 instance 4 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $2,138 · Current $748 Reduced
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse:       a. On or about October 27, 2016, in the warehouse area employees were required to pick stock.   Forty pound boxes on the top shelf of the storage unit were not interlocked or secured.  Employees working in the warehouse were thereby  exposed to struck by hazards.
Recent events (2)
  • — I (S) $748.3
  • — Z (S) $2138

1910.178 L01 I

Serious Gravity 5 1 instance 3 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $2,850 · Current $998 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):       a. On or about October 27,  2016, in the warehouse, employees were required to operate a powered industrial vehicle. The employee did not receive training on the safe operation of the powered industrial vehicle.
Recent events (2)
  • — I (S) $997.5
  • — Z (S) $2850

1910.178 P01

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s).    a. On or about October 27, 2016, in the warehouse,  the Hyster forklift truck had a broken horn,  thereby exposing employees to the hazards associated with a moving forklift truck.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 Q07

Serious Gravity 1 1 instance 4 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:    a. On or about October 27, 2016, in the warehouse, employees were required to use powered industrial vehicles on a daily basis. The powered industrial vehicles were not regularly inspected prior to use to verify their working condition
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 B01 II

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 12, 2016
Abate by
Dec 27, 2016
Penalty
Initial $2,138 · Current $748 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:      a. On or about November 27, 2016, in the warehouse, employees used a cabinet with circuit breakers to turn on the power for the work area.  There was an used opening in the cabinet, thereby exposing employees to live electrical/electric shock.
Recent events (2)
  • — I (S) $748.3
  • — Z (S) $2138

1910.305 B02 I

Serious Gravity 1 1 instance 3 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:  a.  On or about October 27, 2016,  in the loading dock area, employees were required to work where there was a junction box without a cover.  Employees were thereby exposed to the hazards of live electrical/electric shock.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.22 A02

Other-than-serious 1 instance 3 exposed
Issued
Dec 12, 2016
Abate by
Jan 31, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained in a clean and, so far as possible, a dry condition:  On or about October 27, 2016,  in the warehouse,  the employer failed to keep the aisles free of water on the floor, thereby exposing employee to slip hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Mid-American Tool, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341822187.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.