MANDEVILLE, LA —
OSHA Inspection: ORLEANS CASKET COMPANY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ORLEANS CASKET COMPANY, INC. in 1760 SOUTH LANE, MANDEVILLE, LA 70471 (NAICS 321999). OSHA activity number 341823722.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ORLEANS CASKET COMPANY, INC.
- Site address
- 1760 SOUTH LANE
- City
- MANDEVILLE
- State
- LA
- ZIP
- 70471
- Mailing
- 1760 SOUTH LANE, MANDEVILLE, LA 70471
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 12
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $2,138 · Current $1,069 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Wood Department; On or about October 6, 2016, the employer allowed employees to operate the following equipment without a guard around the bit: 1. Rockwell Drill Press 3. Drill Press
Recent events (2)
- — I (S) $1069
- — Z (S) $2138
1910.213 D01
- Issued
- Jan 9, 2017
- Abate by
- Feb 2, 2017
- Penalty
- Initial $3,563 · Current $1,782 Reduced
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Shop area; On or about October 6, 2016, the employer allowed an employee to operate a Higgins L43-116 table saw without a guard over the blade.
Recent events (2)
- — I (S) $1781.5
- — Z (S) $3563
1910.219 D01
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $4,988 · Current $2,494 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) On or about October 6, 2016, the employer allowed employees to operate the following equipment while not having a guard around the pulley system: 1. Wood Department - Rockwell drill press 2. Cap Area - Cap Shaper Machine has two (2) pulley systems not guarded.
Recent events (2)
- — I (S) $2494
- — Z (S) $4988
1910.219 E01 I
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): a) On or about October 6, 2016, the employer allowed employees to operate the following equipment while not having a guard around the belt system: 1. Wood Department - Rockwell drill press 2. Cap Area - Cap Shaper Machine has two (2) belt systems not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) Cap Area; On or about October 24, 2016, the employer allowed employees to operate a Circular Saw while not having the chain and sprocket guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.265 C20 I
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $3,563 · Current $0 Reduced
General-duty citation text
29 CFR 1910.265(c)(20)(i): Design, construction, and maintenance. Blower collecting, and exhaust systems should be designed, constructed, and maintained in accordance with American National Standards Z33.1-1961 (For the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying) and Z12.2-1962 (R1969) (Code for the Prevention of Dust Explosion in Woodworking and Wood Flour Manufacturing Plants), which are incorporated by reference as specified in Sec. 1910.6. a) Cap Area; On or about October 6, 2016, the employer allowed an employee to operate the following equipment: 1. Shaper machine has damage to the blower collecting hose exposing employees to struck-by hazards of wood dust and shavings. 2. Stroke Sander exposes employees to struck-by hazards of wood dust and shavings while sanding wood.
Recent events (2)
- — I (O) $0
- — Z (S) $3563
1910.303 B01
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $3,563 · Current $1,782 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: a) Cap Area; On or about October 6, 2016, the employer allowed employees to operate the Cap Machine while being exposed to an electrical shock hazard. When making air pressure adjustments on the Cap machine employees would experience electrical shock.
Recent events (2)
- — I (S) $1781.5
- — Z (S) $3563
1910.305 B01 II
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $2,138 · Current $1,069 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Glue Area; On or about October 6, 2016, the employer allowed employees to access an electrical panel that had open circuit spaces.
Recent events (2)
- — I (S) $1069
- — Z (S) $2138
More inspections at Orleans Casket Company, INC.
View Orleans Casket Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321999)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341823722.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.