Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DUNBAR ARMORED, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DUNBAR ARMORED, INC. in 6670 CORNERS INDUSTRIAL COURT, NORCROSS, GA 30092 (NAICS 561613). OSHA activity number 341829000.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dunbar Armored, INC. — free Get an email when a new federal OSHA severe-injury report for Dunbar Armored, INC. is published. One employer, no account, unsubscribe in one click.
Site address
6670 CORNERS INDUSTRIAL COURT
City
NORCROSS
State
GA
ZIP
30092
Mailing
6670 CORNERS INDUSTRIAL COURT, NORCROSS, GA 30092
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
561613
Employees
120
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Other-than-serious 1 instance 1 exposed
Issued
Oct 27, 2016
Abate by
Nov 16, 2016
Penalty
Initial $6,663 · Current $0 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were operated a powered industrial truck without a seat belt installed or restraint device.      On or about 10/11/16 at 6670 Corners Industrial Court, Norcross, GA: Where an employee operated the Yale powered industrial truck to lift and move material equipment that was not equipped with a seat belt or restraint device.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation  (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (O) $0
  • — Z (S) $6663

1910.147 C04 II

Serious Gravity 5 1 instance 4 exposed
Issued
Oct 27, 2016
Abate by
Nov 16, 2016
Penalty
Initial $9,994 · Current $7,989 Reduced
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D):    On or about 10/11/16 in the Maintenance Shop at 6670 Corners Industrial Court, Norcross, GA:  Authorized employees were performing service and or maintenance on the facility trucks, vans, cars, and powered industrial trucks such as but not limited to inspections, engine removal and brakes, electrical, and other repairs, which contained electrical, hydraulic, gravity energy sources. The employer failed to develop specific written energy control procedures.
Recent events (2)
  • — I (S) $7989
  • — Z (S) $9994

1910.178 P01

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 27, 2016
Abate by
Nov 16, 2016
Penalty
Initial $8,329 · Current $6,663 Reduced
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition(s):    On or about 10/11/16 in the Maintenance Shop at 6670 Corners Industrial Court, Norcross, GA:    Where employees operated a powered industrial truck with non-operational handbrakes, damage propane tank bracket, and damage instrument gauge. The employer failed to remove the powered industrial truck from service until the repairs could be made.
Recent events (2)
  • — I (S) $6663
  • — Z (S) $8329

View Dunbar Armored, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341829000.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.