GLENVIEW, IL —
OSHA Inspection: ANDRZEY KOLEDA DBA K AND A CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ANDRZEY KOLEDA DBA K AND A CONSTRUCTION, INC. in 909 GLENWOOD LANE, GLENVIEW, IL 60025 (NAICS 238130). OSHA activity number 341844389.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANDRZEY KOLEDA DBA K AND A CONSTRUCTION, INC.
- Site address
- 909 GLENWOOD LANE
- City
- GLENVIEW
- State
- IL
- ZIP
- 60025
- Mailing
- 609 GLENSHIRE RD., GLENVIEW, IL 60025
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- Dec 15, 2016
- Abate by
- Jan 20, 2017
- Penalty
- Initial $300 · Current $300
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Andrzey Koleda dba K and A Construction, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 01 11/01/2016 01 02 11/01/2016 02 01 11/01/2016 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (1)
- — Z (O) $300
1926.501 B13
- Issued
- Oct 26, 2016
- Abate by
- Nov 1, 2016
- Penalty
- Initial $3,741 · Current $2,619 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) On or about October 18, 2016, employees were exposed to the hazard of falling approximately 23 feet from second story top plates while performing carpentry work without fall protection. b) On or about October 18, 2016, employees were exposed to the hazard of falling approximately 13 feet from a first story deck while performing carpentry work without fall protection. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2618.7
- — Z (S) $3741
1926.1052 C01 II
- Issued
- Oct 26, 2016
- Abate by
- Nov 1, 2016
- Penalty
- Initial $2,672 · Current $1,870 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: a) On or about October 18, 2016, employees were exposed to fall hazards of approximately 4 feet, where a stairway from the exterior of the building to the first level was not equipped with a stairrail system along its unprotected sides or edges. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1870.4
- — Z (S) $2672
1926.416 E01
- Issued
- Oct 26, 2016
- Abate by
- Nov 1, 2016
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) On or about October 18, 2016, worn and frayed electrical cords were used to supply electricity to tools and equipment at the site. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341844389.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.