GEORGETOWN, TX —
OSHA Inspection: FREDERICO VEGA-MORENO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FREDERICO VEGA-MORENO in 409 MILLARD STREET, GEORGETOWN, TX 78628 (NAICS 238140). OSHA activity number 341846657.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FREDERICO VEGA-MORENO
- Site address
- 409 MILLARD STREET
- City
- GEORGETOWN
- State
- TX
- ZIP
- 78628
- Mailing
- 311-B FLOURNOY DRIVE, AUSTIN, TX 78745
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.100 A
- Issued
- Oct 21, 2016
- Penalty
- Initial $1,604 · Current $1,604
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets. On or about 18 October 2016, four workers performing masonry work at both the ground level and while on a scaffold were not wearing hard hats while there was an overhead hazard, exposing the workers to the hazard of being struck by falling materials, tools, and debris.
Recent events (1)
- — Z (S) $1604
1926.451 E01
- Issued
- Oct 21, 2016
- Abate by
- Oct 27, 2016
- Penalty
- Initial $1,604 · Current $1,604
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Cross-braces were used as a means of access. On or about 18 October 2016, two workers performing masonry work on the second level of a tubular-welded frame scaffold accessed the scaffold by using the cross-braces and legs of the scaffold, exposing the workers to a fall hazard of approximately 13 to 14 feet to the ground below.
Recent events (1)
- — Z (S) $1604
1926.451 G01 VII
- Issued
- Oct 21, 2016
- Abate by
- Oct 27, 2016
- Penalty
- Initial $1,604 · Current $1,604
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. On or about 18 October 2016, two workers performing masonry work on the second level of a tubular-welded frame scaffold were not protected from falling either by the use of personal fall arrest systems or guardrail systems, exposing the workers to a fall hazard of approximately 13 to 14 feet to the ground below.
Recent events (1)
- — Z (S) $1604
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341846657.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.