REXFORD, MT —
OSHA Inspection: MONTANA WOODWORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MONTANA WOODWORKS, INC. in 76 WHITETAIL DR, REXFORD, MT 59930 (NAICS 337122). OSHA activity number 341849123.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MONTANA WOODWORKS, INC.
- Site address
- 76 WHITETAIL DR
- City
- REXFORD
- State
- MT
- ZIP
- 59930
- Mailing
- 76 WHITETAIL DR, REXFORD, MT 59930
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337122
- Employees
- 31
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.22 A01
- Issued
- Jan 13, 2017
- Abate by
- Feb 9, 2017
- Penalty
- Initial $5,301 · Current $3,181 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. a) Main Shop: On October 19, 2016 and at times prior, employees were exposed to fire and explosion hazards while constructing custom furniture with a class II saw dust on elevated surfaces and ledges.
Recent events (2)
- — I (S) $3180.6
- — Z (S) $5301
1910.24 H
- Issued
- Jan 13, 2017
- Abate by
- Feb 9, 2017
- Penalty
- Initial $4,240 · Current $2,544 Reduced
General-duty citation text
29 CFR 1910.24(h): Handrails were not provided on at least one side of closed stairways preferably on the right side descending: a) Main Shop: On October 19, 2016 and at times prior, employees were exposed to a fall to the floor below using a stairway with approximately twelve risers to access and egress the upper storage area.
Recent events (2)
- — I (S) $2544
- — Z (S) $4240
1910.147 D04 I
- Issued
- Jan 13, 2017
- Abate by
- Feb 9, 2017
- Penalty
- Initial $5,300 · Current $3,180 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) Main Shop: On October 19, 2016 and at times prior, employees were exposed to amputation hazards from unexpected machine start up while clearing and performing maintenance on machines such as, but not limited to, Cemco Multi-Drill Head. b) Panel Shop: On October 19, 2016 and at times prior, employees were exposed to amputation hazards from unexpected machine start up while clearing and performing maintenance on machines such as, but not limited to, Panhans Model 698 Beam Saw and CNC Rip Saw.
Recent events (2)
- — I (S) $3180
- — Z (S) $5300
1910.212 B
- Issued
- Jan 13, 2017
- Abate by
- Feb 9, 2017
- Penalty
- Initial $4,240 · Current $2,544 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Grizzly 18" Wood Band Saw: On October 19, 2016 and at times prior, the employer failed to permanently install the machine through the factory mounting holes. b) Shop Fox 17" Drill Press: On October 19, 2016 and at times prior, the employer failed to permanently install the machine through the factory mounting holes. c) Delta 3/4HP Serial# 12E000166 2012 21 RH: On October 19, 2016 and at times prior, the employer failed to permanently install the machine through the factory mounting holes. d) Grizzly G7948 Floor Drill Press: On October 19, 2016 and at times prior, the employer failed to permanently install the machine through the factory mounting holes. e) Reliant Model# DD400 3/4HP Sander: On October 19, 2016 and at times prior, the employer failed to permanently install the machine through the factory mounting holes.
Recent events (2)
- — I (S) $2544
- — Z (S) $4240
1910.178 A04
- Issued
- Jan 13, 2017
- Abate by
- Feb 9, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a) Yard: On October 19, 2016 and at times prior, the employer failed to obtain manufacturers prior written approval prior to modifying the forks on the Kubota Model#R520 Serial#10418 powered industrial truck.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV B
- Issued
- Jan 13, 2017
- Abate by
- Feb 9, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were run through holes in walls, ceilings, or floors: a) Generator Shack: On October 19, 2016 and at times prior, the employer ran a flexible cord through a window in the panel shop and under a doorway to be used on the block heater for the generator's block heater.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 337122)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341849123.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.