NEW YORK, NY —
OSHA Inspection: PROSPER DESIGN INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PROSPER DESIGN INC. in 259 WEST 10TH ST., NEW YORK, NY 10014 (NAICS 238350). OSHA activity number 341874501.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PROSPER DESIGN INC.
- Site address
- 259 WEST 10TH ST.
- City
- NEW YORK
- State
- NY
- ZIP
- 10014
- Mailing
- 22 STEVENS AVE., YONKERS, NY 10704
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 10
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.300 B01
- Issued
- Dec 17, 2016
- Penalty
- Initial $2,672 · Current $2,672
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: a) 259 W. 10 St. apartments on 2nd floor: Employees were exposed to amputation hazards while using a grinder with a missing guard to cut metal railings, on or about 10/25/16.
Recent events (3)
- — F (S) $2672
- — C (S) $2672
- — Z (S) $2672
1926.404 B01 I
- Issued
- Dec 17, 2016
- Penalty
- Initial $2,672 · Current $802 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): General. The employer shall use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors. a) 259 W. 10 St. apartments on 2nd floor: Employees were exposed to electric shock while using an electric grinder that was not protected by a GFCI or an assured equipment grounding conductor program, on or about 10/25/16.
Recent events (3)
- — F (S) $801.5
- — C (S) $2672
- — Z (S) $2672
1926.404 F06
- Issued
- Dec 17, 2016
- Penalty
- Initial $2,138 · Current $2,138
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) 259 W. 10 St. apartments on 2nd floor: Employees were exposed to electric shock while using an extension cord that had a missing ground pin to energize different tools; on or about 10/25/16.
Recent events (3)
- — F (S) $2138
- — C (S) $2138
- — Z (S) $2138
More inspections in this industry (NAICS 238350)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341874501.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.