BRIDGE CITY, TX —
OSHA Inspection: FABRICATING SOLUTIONS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FABRICATING SOLUTIONS, LLC in 745 JONES ST., BRIDGE CITY, TX 77611 (NAICS 332999). OSHA activity number 341876217.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FABRICATING SOLUTIONS, LLC
- Site address
- 745 JONES ST.
- City
- BRIDGE CITY
- State
- TX
- ZIP
- 77611
- Mailing
- 745 JONES ST., BRIDGE CITY, TX 77611
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 15
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.184 E01
- Issued
- Mar 8, 2017
- Abate by
- Mar 14, 2017
- Penalty
- Initial $2,897 · Current $1,593 Reduced
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: a) At the site, alloy steel chain slings did not have permanently affixed identification markings, exposing employees to struck by hazards.
Recent events (2)
- — I (S) $1593.35
- — Z (S) $2897
1910.212 A03 II
- Issued
- Mar 8, 2017
- Abate by
- Mar 14, 2017
- Penalty
- Initial $5,070 · Current $2,789 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) In the main shop area, the point of operation on a Piranha ironworker model number PII110 was not guarded, exposing employees to amputation hazards. b) In the main shop area, the point of operation on a Marvel Series 8 Mark II band saw was not guarded, exposing employees to amputation hazards. c) In the main shop area, the point of operation on a 320-ton Accupress press brake model number 732016 was not guarded, exposing employees to amputation hazards. d) In the main shop area, the point of operation on a shear press was not guarded, exposing employees to amputation hazards. e) In the main shop area, the point of operation on a 500-ton Pacific press brake, model number K 750-24/22, serial number A 1806, was not guarded, exposing employees to amputation hazards.
Recent events (2)
- — I (S) $2788.5
- — Z (S) $5070
1910.215 B09
- Issued
- Mar 8, 2017
- Abate by
- Mar 14, 2017
- Penalty
- Initial $2,897 · Current $1,593 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: a) In the main shop area, the distance between the adjustable tongue guard and the abrasive wheel on a Cincinnati bench grinder exceeded one-fourth of an inch, exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $1593.35
- — Z (S) $2897
1910.242 B
- Issued
- Mar 8, 2017
- Abate by
- Mar 14, 2017
- Penalty
- Initial $2,897 · Current $1,593 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) In the main shop area, compressed air for cleaning purposes was used with a pressure above 30 p.s.i., exposing employees to struck by hazards.
Recent events (2)
- — I (S) $1593.35
- — Z (S) $2897
1910.304 G05
- Issued
- Mar 8, 2017
- Abate by
- Mar 14, 2017
- Penalty
- Initial $3,078 · Current $1,693 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) At the site, in the main shop area, the grounding conductor on a Maxx Air shop fan model#: BF36DD was not grounded by connection to the cord connector, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $1692.9
- — Z (S) $3078
More inspections in this industry (NAICS 332999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341876217.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.