OSHA Inspection: BODY-SOLID, INC.

Issued

Feb 7, 2017

Abate by

Apr 28, 2017

Penalty

Initial $8,873 · Current $4,080 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crush-by hazards when utilizing unanchored and damaged steel storage racks:    (a)  On or about October 28 and November 4, 2016, throughout the warehouse the employer did not ensure that the storage rack system displayed plaques with rated loads (1.4.2 plaque).   The four level racking system with multiple bays used to store pallets containing boxes with metal parts and weights for work out equipment weighed from 1,000 to 1,500 pounds per pallet.    (b)  On or about October 28 and November 4, 2016, throughout the warehouse the employer did not ensure that the steel storage racks column base plates were anchored to the floors by anchor bolts (1.4.7 column anchorage);    (c) On or about October 28 and November 4, 2016, throughout the warehouse the employer did not ensure that the steel storage racks with visible damage were immediately isolated until the damaged portions were evaluated by a storage rack design professional and were not placed back into service until repaired and certification was obtained that the repaired components of the storage rack system were restored to at least their original design capacity (1.4.9 rack damage);    (d) On or about October 28 and November 4, 2016, throughout the warehouse the employer did not ensure that the storage rack system and rack components were within the allowable out-of-plumb and out-of-straight allowances per (1.4.11.1 out-of-plumb limits) and (1.4.11.2 out-of-straight limit);      Employees were exposed to struck-by and/or crush-by hazards while working in and around the unanchored and damaged storage rack system.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Feb 7, 2017

Abate by

Mar 6, 2017

Penalty

Initial $5,070 · Current $2,720 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).    (a) On or about October 28, 2016 the employer failed to ensure that all employees who operated powered industrial trucks were competent and had demonstrated their competency through training and an evaluation of their driving capabilities.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.