Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HOLT CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HOLT CONSTRUCTION in 19251 DEE LN, CANYON, TX 79015 (NAICS 238130). OSHA activity number 341879476.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Holt Construction — free Get an email when a new federal OSHA severe-injury report for Holt Construction is published. One employer, no account, unsubscribe in one click.
Establishment
HOLT CONSTRUCTION
Site address
19251 DEE LN
City
CANYON
State
TX
ZIP
79015
Mailing
PO BOX 9423, AMARILLO, TX 79105
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 7, 2016
Penalty
Initial $1,363 · Current $818 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets.    Employees  engaged in framing operations were exposed to struck by hazards while working on the ground, as other employees performed framing work above them at a height of approximately 9 feet.
Recent events (2)
  • — I (S) $817.8
  • — Z (S) $1363

1926.404 F06

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 7, 2016
Penalty
Initial $1,363 · Current $818 Reduced
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous.      Employees engaged in framing activities were exposed to electrical shock hazards.
Recent events (2)
  • — I (S) $817.8
  • — Z (S) $1363

1926.405 G02 IV

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 7, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws.   Employees engaged in framing activities were exposed to electrical shock hazards from pulled strain relief on electrical cords attached to saws.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.501 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 7, 2016
Abate by
Dec 5, 2016
Penalty
Initial $3,207 · Current $1,924 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a)  NOTE TO CSHO: USE THIS OPTION ONLY IN CASES WHERE THE INFEASIBILITY/GREATER HAZARD EXCEPTION IS NOT IN ISSUE.        Employees  engaged in framing operations were exposed to fall hazards in excess of six feet.
Recent events (2)
  • — I (S) $1924.2
  • — Z (S) $3207

1926.1053 B04

Serious Gravity 1 1 instance 2 exposed
Issued
Nov 7, 2016
Penalty
Initial $1,363 · Current $818 Reduced
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed.        Employees engaged in framing work were exposed to fall hazards in excess of 9 feet while using a ladder that was not designed to lean against the wall.
Recent events (2)
  • — I (S) $817.8
  • — Z (S) $1363

1926.1053 B13

Serious Gravity 1 1 instance 1 exposed
Issued
Nov 7, 2016
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step.      Employees engaged in framing activities were exposed to fall hazards while using the top step of an "A" ladder to access the upper level of the framed area..
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Holt Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341879476.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.