OSHA Inspection: DISPLAY SOURCE ALLIANCE LLC

Issued

Feb 23, 2017

Penalty

Initial $10,755 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:        a)    Employee working in the production area were not wearing eye protection while operating a Wysong 40-ton rotary actuated hydra-mechanical press brake; model number H4072, serial number HPB13-248, exposed to eye/face injuries.

Issued

Feb 23, 2017

Abate by

Apr 21, 2017

Penalty

Initial $12,548 · Current $7,500 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed:          a)     The employer did not conduct a periodic inspection of the energy control procedure at least annually. This violation was discovered on November 2, 2016, at a workplace located at 1371 S. Town East Blvd., Mesquite, Texas 75149; where the employer did not periodically inspect the energy control procedures at least annually to ensure that the procedure and requirements of this standard are being followed.

Issued

Feb 23, 2017

Abate by

Mar 21, 2017

Penalty

Initial $12,548 · Current $8,750 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:        a)     The employer did not ensure that one or more methods of machine guarding are provided to protect the operator and other employees in the production area from hazards such as those created by point of operation, ingoing nip points, rotating parts. This violation was discovered on November 2, 2016, at a workplace located at 1371 S. Town East Blvd., Mesquite, Texas 75149; where at least one (1) employee was not protected from coming in contact with point of operation while working on a Wysong 40-ton rotary actuated hydra-mechanical press brake; model number H4072, serial number HPB13-248.