Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SABIC INNOVATIVE PLASTICS

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of SABIC INNOVATIVE PLASTICS in 1 PLASTICS DRIVE, LOWNDESBORO, AL 36752 (NAICS 326113). OSHA activity number 341887156.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Sabic Innovative Plastics — free Get an email when a new federal OSHA severe-injury report for Sabic Innovative Plastics is published. One employer, no account, unsubscribe in one click.
Site address
1 PLASTICS DRIVE
City
LOWNDESBORO
State
AL
ZIP
36752
Mailing
1 PLASTICS DRIVE, BURKVILLE, AL 36752
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326113
Employees
350
Ownership type
A

5 citations on file for this inspection.

1910.132 A

Serious Gravity 5 3 instances 3 exposed
Issued
Mar 28, 2017
Abate by
Apr 3, 2017
Penalty
Initial $8,311 · Current $8,311
29 CFR 1910.132(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact:    (a) Unit 300 Phenol cake wash filter area: On October 30, 2016, employees engaged in filter changes (3259S, 3359S) were potentially exposed to Phenol due to not wearing the required flame retardant full chemical suit (jacket, pants, protective hood and chemical rubber boots).
Recent events (2)
  • — I (S) $8311
  • — Z (S) $8311

1910.133 A01

Serious Gravity 5 3 instances 3 exposed
Issued
Mar 28, 2017
Abate by
Apr 3, 2017
Penalty
Initial $8,311 · Current $0 Reduced
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:    (a) Unit 300 Phenol cake wash filter area: On October 30, 2016, employees engaged in filter changes (3259S, 3359S) were potentially exposed to Phenol due to not wearing chemical goggles.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8311

1910.132 F01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 28, 2017
Abate by
Apr 5, 2017
Penalty
Initial $8,311 · Current $8,311
29 CFR 1910.132(f)(1)(ii): The employer did not provide training to each employee who is required by this section to use PPE on knowing what PPE is necessary:  (a) Unit 300 Phenol cake wash filter area.  Two chemical operators in training where not provided training on all the PPE that was necessary when changing filter media on filter 3259S and filter 3359S.  The operators were not aware of the requirement to wear flame retardant full chemical suite (Jacket and Pants), Protective Hood and Chemical Rubber Boots during the filter media change process.
Recent events (2)
  • — I (S) $8311
  • — Z (S) $8311

1910.147 C06 I

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 28, 2017
Abate by
Apr 5, 2017
Penalty
Initial $8,311 · Current $8,311
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:  (a) Unit 300 Phenol cake wash filter area.  On October 30, 2016 one chemical operator trainee was changing filter media on filter 3259S when he was supposed to be changing the media on filter 3259 and he nor other employees were wearing the PPE required in the energy control filter change procedure.  The employer performs inspections of the energy control procedure on a 35 month schedule.
Recent events (2)
  • — I (S) $8311
  • — Z (S) $8311

1910.147 D04 I

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 28, 2017
Abate by
Apr 5, 2017
Penalty
Initial $10,864 · Current $10,864
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  (a) Unit 300 Phenol cake wash filter area.  On October 30, 2016 one chemical operator trainee was changing filter media on filter 3259S when he was supposed to be changing the media on filter 3259 and an authorized person had not place a lock on the lock out box.
Recent events (2)
  • — I (S) $10864
  • — Z (S) $10864

View Sabic Innovative Plastics's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341887156.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.