WHEATLAND, PA —
OSHA Inspection: RUDY D. TROYER
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of RUDY D. TROYER in 21 COUNCIL STREET, WHEATLAND, PA 16161 (NAICS 321113). OSHA activity number 341903532.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RUDY D. TROYER
- Site address
- 21 COUNCIL STREET
- City
- WHEATLAND
- State
- PA
- ZIP
- 16161
- Mailing
- 187 STOCK FARM ROAD, JACKSON CENTER, PA 16133
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 D04 I
- Issued
- May 5, 2017
- Abate by
- Jul 10, 2017
- Penalty
- Initial $2,716 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: A.) Rudy D. Troyer dba Rudy D. Troyer, 21 Council Street, Wheatland, PA 16161, on or about November 9, 2016 and times prior thereto: Authorized employees were performing service and maintenance on equipment including, but not limited to, the head saw and edger. The authorized employees were only taking out the key to the motor control and were not affixing a lockout device to the energy isolation device.
Recent events (2)
- — I (S) $1200
- — Z (S) $2716
1910.147 C06 I
- Issued
- May 5, 2017
- Abate by
- Jul 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: A.) Rudy D. Troyer dba Rudy D. Troyer, 21 Council Street, Wheatland, PA 16161, on or about November 9, 2016 and times prior thereto: Authorized employees were performing service and maintenance on equipment including, but not limited to, the head saw and edger. Periodic inspections have not been conducted with employees.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 G01
- Issued
- May 5, 2017
- Abate by
- Jul 10, 2017
- Penalty
- Initial $1,630 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: A.) Rudy D. Troyer dba Rudy D. Troyer, 21 Council Street, Wheatland, PA 16161, on or about November 9, 2016 and times prior thereto: Employees are provided with and permitted to use portable dry chemical fire extinguishers. Employees have not had portable fire extinguisher training.
Recent events (2)
- — I (S) $1200
- — Z (S) $1630
1910.212 A03 II
- Issued
- May 5, 2017
- Abate by
- Jun 1, 2017
- Penalty
- Initial $2,716 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, was not guarded. A.) Rudy D. Troyer dba Rudy D. Troyer, 21 Council Street, Wheatland, PA 16161, mill area, on or about November 9, 2016 and times prior thereto: Employees operate a head saw for sawmill operations. The head saw blade was not guarded.
Recent events (2)
- — I (S) $1200
- — Z (S) $2716
1910.212 A01
- Issued
- May 5, 2017
- Abate by
- Jun 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: A.) Rudy D. Troyer dba Rudy D. Troyer, 21 Council Street, Wheatland, PA 16161, mill area, on or about November 9, 2016 and times prior thereto: A drum and cable system that moves the carriage along the head saw blade was not equipped with guarding to prevent exposure to in running nip point hazards. B.) Rudy D. Troyer dba Rudy D. Troyer, 21 Council Street, Wheatland, PA 16161, mill area, on or about November 9, 2016 and times prior thereto: A cable and pulley setup used to move the carriage along the head saw blade was not equipped with guarding to prevent exposure to in running nip point hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Rudy D. Troyer
View Rudy D. Troyer's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341903532.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.