SHREVEPORT, LA —
OSHA Inspection: VYCOMP PRODUCTION MACHINING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VYCOMP PRODUCTION MACHINING in 8422 W. ANTOINE LOOP, SHREVEPORT, LA 71129 (NAICS 332710). OSHA activity number 341913069.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VYCOMP PRODUCTION MACHINING
- Site address
- 8422 W. ANTOINE LOOP
- City
- SHREVEPORT
- State
- LA
- ZIP
- 71129
- Mailing
- 8422 W. ANTOINE LOOP, SHREVEPORT, LA 71129
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 10
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 9, 2017
- Penalty
- Initial $3,563 · Current $2,138 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Shop area; On or about November 16, 2016, the employer allowed employees to operate a Kingston Lathe while not having the fixed or movable guard in place to protect against point of operation injuries and contact with rotating parts.
Recent events (2)
- — I (S) $2137.8
- — Z (S) $3563
1910.212 A03 II
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $3,563 · Current $2,138 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Throughout the facility; On or about November 16, 2016, the following equipment did not have a guard around the bit to prevent a point of operation injury: 1. Bridgeport Drill Press 2. Rockwell/Delta Drill Press 3. Ryobi Drill Press (2) 4. Jet Drill Press (2) 5. Drill Press
Recent events (2)
- — I (S) $2137.8
- — Z (S) $3563
1910.212 B
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $3,563 · Current $2,138 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Throughout facility; On or about November 16, 2016, the employer allowed employees to operate the following equipment while not being anchored down or secured from moving about: 1. Bridgeport Drill Press 2. Rockwell/Delta Drill Press 3. Ryobi Drill Press (2) 4. Jet Drill Press (2) 5. Drill Press
Recent events (2)
- — I (S) $2137.8
- — Z (S) $3563
1910.219 D01
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $4,276 · Current $2,566 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Shop area; On or about November 16, 2016, the employer allowed employees to operate an Alva F Allen Punch Press (4) that did not have a guard around the pulley systems.
Recent events (2)
- — I (S) $2565.6
- — Z (S) $4276
1910.219 E02 I
- Issued
- Jan 9, 2017
- Abate by
- Feb 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(2)(i): Overhead horizontal belt(s) with lower parts seven -7 feet or less from the floor(s) or platform(s) were not guarded on the sides and bottom in accordance with the requirements specified at CFR 1910.219(o)(3)(a): a) Shop area; On or about November 16, 2016, the employer allowed employees to operate an Alva F Allen Punch Press (4) that did not have a guard around the belts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 F06
- Issued
- Jan 9, 2017
- Abate by
- Jan 20, 2017
- Penalty
- Initial $2,138 · Current $1,283 Reduced
General-duty citation text
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals, and which, in conjunction with the other information immediately available to employees under the hazard communication program, will provide employees with the specific information regarding the physical and health hazards of the hazardous chemical. a) Shop area; On or about November 16, 2016, the employer did not ensure all containers were properly labeled. The condition applies to two unlabeled 1 gallon containers of Mobil Vactra No. 2.
Recent events (2)
- — I (S) $1282.8
- — Z (S) $2138
1910.1200 G08
- Issued
- Jan 9, 2017
- Penalty
- Initial $400 · Current $240 Reduced
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace: a) Throughout facility; On or about November 16, 2016, the employer did not maintain SDSs for chemicals such as, but not limited to, Mobil Vectra No. 2.
Recent events (2)
- — I (O) $240
- — Z (O) $400
More inspections at Vycomp Production Machining
View Vycomp Production Machining's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341913069.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.