OSHA Inspection: DAN ORWIG

Issued

2017-05-17 00:00:00

Abate by

2017-07-07 00:00:00

Penalty

Initial $3803.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.651(k)(1): Daily inspections of excavations, the adjacent areas, and protective systems were not made by a competent person for evidence of a situation that could have resulted in possible cave-ins, indications of failure of protective systems  Location: 907 Tremont Street Duxbury, MA  An employee was exposed to cave in hazards, where he was sent to work in a trench that was not inspected by a competent person.

Issued

2017-05-17 00:00:00

Abate by

2017-05-25 00:00:00

Penalty

Initial $3803.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652(c).   Location:  907 Tremont Street, Duxbury, MA  An employee was exposed to cave-in hazards while working in a trench approximately 7 foot 9 inches deep that had straight cut walls, with no cave-in protection.

Issued

2017-05-17 00:00:00

Abate by

2017-07-07 00:00:00

Penalty

Initial $1630.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  Location: 907 Tremont Street Duxbury, MA   A step ladder being used for access into a trench, was not being used in accordance to manufacturer recommendations.

Issued

2017-05-17 00:00:00

Abate by

2017-07-07 00:00:00

Penalty

Initial $3803.00 · Current $0.00 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards from a gasoline-powered cut-off saw:  Location: 907 Tremont Street Duxbury, MA  An employee was exposed to struck-by and laceration hazards while working next to another worker who was cutting an 8 inch ductile iron pipe with a gasoline powered STIHL cut-off saw that was equipped with a diamond blade with abrasive material on the sides.

Issued

2017-05-17 00:00:00

Abate by

2017-07-07 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1926.251(b)(1): Welded alloy steel chain sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and sling manufacturer:  Location: 907 Tremont Street Duxbury, MA  Employee was using a welded chain that did not have identification tags to lift a compactor into and out of a trench.