KENNESAW, GA —
OSHA Inspection: CRASHMASTER COLLISION CENTER, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CRASHMASTER COLLISION CENTER, LLC in 2573 KENNESAW DUE WEST ROAD, KENNESAW, GA 30144 (NAICS 811121). OSHA activity number 341932598.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRASHMASTER COLLISION CENTER, LLC
- Site address
- 2573 KENNESAW DUE WEST ROAD
- City
- KENNESAW
- State
- GA
- ZIP
- 30144
- Mailing
- 2573 KENNESAW DUE WEST ROAD, KENNESAW, GA 30144
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 5
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.132 D02
- Issued
- Mar 1, 2017
- Abate by
- Mar 13, 2017
- Penalty
- Initial $1,630 · Current $978 Reduced
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): a) Spray Room: On or about November 22, 2016, and at times prior, the employer failed to certify that a written personal protective equipment hazard assessment was performed for employees exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents while spray painting components used in automotive body and collision repair. Employees performed spray painting, mixing and other activities involving the spray painting of automotive parts.
Recent events (2)
- — I (S) $978
- — Z (S) $1630
1910.132 F01
- Issued
- Mar 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment a) Spray Paint Area: On or about November 22, 2016, and at times prior, the employer failed to provide training on the use, care and storage of personal protective equipment for employees exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents while spray painting components used in automotive body and collision repair. Employees performed spray painting, mixing and other activities involving the spray painting of automotive parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 C
- Issued
- Mar 1, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $1,630 · Current $978 Reduced
2590
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: a) Paint Area: On or about November 22, 2016, and at times prior, the employer failed to develop and implement a written respiratory protection program for required users of a 3M full face mask respirator (6900 series). Employees were exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents to spray paint components used in automotive body and collision repair.
Recent events (2)
- — I (S) $978
- — Z (S) $1630
1910.134 E01
- Issued
- Mar 1, 2017
- Penalty
- Initial $0 · Current $0
2590
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Paint Area: On or about November 22, 2016, and at times prior, the employer failed to provide a medical evaluation for employees required to utilizing a 3M full face respirator (6900 series) while spray painting. Employees were exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents to spray paint components used in automotive body and collision repair.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F01
- Issued
- Mar 1, 2017
- Penalty
- Initial $0 · Current $0
2590
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT a) Spray Paint Area: On or about November 22, 2016, and at times prior, the employer failed to provide respiratory fit tests for employees that utilize a 3M full face respirator (6900 series). Employees were exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents to spray paint components used in automotive body and collision repair. Employees performed spray painting, mixing and other activities involving the spray painting of automotive parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 K
- Issued
- Mar 1, 2017
- Penalty
- Initial $0 · Current $0
2590
General-duty citation text
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable and effective training to employees who are required to use respirators: a) Spray Paint Area: On or about November 22, 2016, and at times prior, the employer failed to ensure that employees received training on respiratory protection for users of a 3M full face respirator (6900 series). Employees were exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents to spray paint components used in automotive body and collision repair.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Mar 1, 2017
- Abate by
- Mar 20, 2017
- Penalty
- Initial $1,630 · Current $978 Reduced
2590
General-duty citation text
29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Spray Paint Area: On or about November 22, 2016, and at times prior, the employer failed to develop and implement a written hazard communication program for employees exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents to spray paint components used in automotive body and collision repair. Employees performed spray painting, mixing and other activities involving the spray painting of automotive parts.
Recent events (2)
- — I (S) $978
- — Z (S) $1630
1910.1200 H01
- Issued
- Mar 1, 2017
- Penalty
- Initial $0 · Current $0
2590
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Spray Paint Area: On or about November 22, 2016, and at times prior, the employer failed to provide training on hazard communication for employees exposed to materials such as, but not limited to, xylene (lacquer thinner-FPL50-53), Standox basecoat # 857, and other flammable solvents to spray paint components used in automotive body and collision repair. Employees performed spray painting, mixing and other activities involving the spray painting of automotive parts
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Crashmaster Collision Center, LLC
View Crashmaster Collision Center, LLC's full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341932598.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.