HAYDEN, ID —
OSHA Inspection: QUALITY POWDERCOATING INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of QUALITY POWDERCOATING INC. in 2150 HAYDEN AVE., HAYDEN, ID 83835 (NAICS 332812). OSHA activity number 341965424.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY POWDERCOATING INC.
- Site address
- 2150 HAYDEN AVE.
- City
- HAYDEN
- State
- ID
- ZIP
- 83835
- Mailing
- 2150 HAYDEN AVE., HAYDEN, ID 83835
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332812
- Employees
- 6
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C01
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $2,716 · Current $1,300 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) Powder Coating Area: On or about December 11, 2016 and at times prior, employees were wearing 3M half face respirators while powder coating. (b) Sand Blasting Area: On or about December 11, 2016 and at times prior, employees were wearing RPB Nova3 blasting hood while sand blasting. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1300
- — Z (S) $2716
1910.134 D01 II
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(d)(1)(ii): The employer did not select and use a NIOSH-certified respirator in compliance with the conditions of its certification: (a) Sand Blasting Area: On or about December 11, 2016 and at times prior, employees were using a RPB Nova3 blasting hood with a pneumatic tool hose to supply breathing air to the user. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 G01 I
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(g)(1)(i)[A] The employer permitted respirators with tight-fitting facepieces to be worn by employees who have facial hair that came between the sealing surface of the facepiece and the face: (a) Powder Coating Area: On or about December 11, 2016 and at times prior, employees were wearing 3M half face respirators while powder coating. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 I05 III
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(i)(5)(iii): The compressor's sorbent bed and filters were not maintained and replaced or refurbished periodically as instructed by the manufacturer: (a) Sandblasting Area: On or about December 11, 2016 and at times prior, employees breath air supplied from Bullard Free-Air Pump while sandblasting. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 I05 IV
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(i)(5)(iv): The tag containing the most recent change to the sorbent beds was not kept or maintained at the compressor: (a) Sandblasting Area: On or about December 11, 2016 and at times prior, employees breath air supplied from Bullard Free-Air Pump while sandblasting. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.244 B
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $3,259 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.244(b): Abrasive blast cleaning nozzle(s) were not equipped with an operating valve which had to be held open manually: (a) Sandblasting Area: On or about December 11, 2016 and at times prior, employees were sandblasting metal parts. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1700
- — Z (S) $3259
1910.1200 E01
- Issued
- Feb 9, 2017
- Abate by
- Mar 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Powder Coating Area: On or about December 11, 2016 and at times prior, Employer directed employees to work with chemicals (including but not limited to Cardinal T002-BK08 FS#27038 Black powder coating material and Green Diamond 3060 blasting media) during the powder coating and blasting process. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332812)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341965424.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.