Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: U.S. AIR FORCE 60TH FORCE SUPPORT SQUADRON

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of U.S. AIR FORCE 60TH FORCE SUPPORT SQUADRON in 571 TRAVIS AVE. BLDG. 214, TRAVIS AFB, CA 94535 (NAICS 928110). OSHA activity number 341976504.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch U.S. AIR Force 60TH Force Support Squadron — free Get an email when a new federal OSHA severe-injury report for U.S. AIR Force 60TH Force Support Squadron is published. One employer, no account, unsubscribe in one click.
Site address
571 TRAVIS AVE. BLDG. 214
City
TRAVIS AFB
State
CA
ZIP
94535
Mailing
400 BRENNAN CIRCLE BUILDING 51, ROOM 240, TRAVIS AFB, CA 94535
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
928110
Employees
1000
Ownership type
D

5 citations on file for this inspection.

1910.110 B06 VII

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.110(b)(6)(vii): The separation between liquefied petroleum gas containers and flammable liquid tanks was not 20 feet.    Golf Maintenance Facility, Bldg. 2010: On 12/05/2016, the employer did not store an oxygen gas cylinder 20 feet apart from a flammable acetylene cylinder.
Recent events (1)
  • — Z (S) $0

1910.110 F02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Feb 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.110(f)(2)(i): Portable LP-Gas containers in storage were not located so as to minimize exposure to excessive temperature rise, physical damage, or tampering by unauthorized persons:  Golf Maintenance Facility, Bldg. 2010: On 12/05/2016, the employer did not secure an oxygen gas cylinder to prevent from being tipped over.
Recent events (1)
  • — Z (S) $0

1910.215 A04

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 27, 2017
Abate by
Mar 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:   Golf Course Maintenance Facility Bldg. 2013: On 12/05/ 2016, a Ryobi 6" bench grinder was not equipped with a work rest.
Recent events (1)
  • — Z (S) $0

1910.37 B02

Repeat 3 instances 3 exposed
Issued
Feb 27, 2017
Abate by
Mar 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(2): Each exit must be clearly visible and marked by a sign reading "Exit":  On 11/28/2016, exit signs to clearly mark designated exits  were not provided in the following locations:   a) Dining Hall Kitchen, Storage Room  b) Dining Hall Kitchen, Supply Room  c) Golf Course Maintenance Facility Bldg. 2013    The U.S. Air Force 60th Force was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.37(b)(2), which was contained in OSHA inspection number 191759, citation number 01, item number 002 and was affirmed as a final order on 08/22/2012, with respect to a workplace located at 411 Airman Drive, Travis AFB, CA 94535.  The U.S. Air Force 60th Force Support Squadron was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.37(b)(2), which was contained in OSHA inspection number 280260, citation number 01, item number 001 and was affirmed as a final order on 08/22/2012, with respect to a workplace located at 5601 Meriden Rd, Vacaville, CA 95687 and 571 Travis Ave, Bldg. 214, Travis AFB, CA 94535.
Recent events (1)
  • — Z (R) $0

1910.215 B09

Repeat Gravity 5 2 instances 4 exposed
Issued
Feb 27, 2017
Abate by
Mar 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  On 12/5/2016, tongue guards were not available or properly adjusted in the following locations:  a) Golf Course Maintenance Facility Bldg. 2013: A Ryobi  6" bench grinder was missing a tongue guard.    b) Auto Hobby Shop Bldg. 226: A Wissota 6" bench grinder tongue guard was not adjusted to 1/4th of an inch away from the abrasive wheel.  The U.S. Air Force 60th Civil Engineering Squadron was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.215(b)(9) which was contained in OSHA inspection number 191646, citation number 01, item number 003 and was affirmed as a final order on 08/22/2012, with respect to a workplace located at 241 V Street bldg. 176, Travis AFB, CA94535.
Recent events (1)
  • — Z (R) $0

View U.S. AIR Force 60TH Force Support Squadron's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341976504.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.