FORT LAUDERDALE, FL —
OSHA Inspection: C.A. PRECISION, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of C.A. PRECISION, INC. in 1004 NW 51 PLACE, FORT LAUDERDALE, FL 33309 (NAICS 332710). OSHA activity number 341988160.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C.A. PRECISION, INC.
- Site address
- 1004 NW 51 PLACE
- City
- FORT LAUDERDALE
- State
- FL
- ZIP
- 33309
- Mailing
- 1004 NW 51 PLACE, FORT LAUDERDALE, FL 33309
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.303 G02 I
- Issued
- Jun 13, 2017
- Penalty
- Initial $1,630 · Current $978 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): On or about December 20, 2016, the employer permitted employees to plug in electrical cords to power tools and equipment into an outlet with exposed wires.
Recent events (2)
- — I (S) $978
- — Z (S) $1630
1910.134 K06
- Issued
- Jun 13, 2017
- Abate by
- Jul 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(6): The basic advisory information on respirators, as presented in Appendix D of this section, shall be provided by the employer in any written or oral format, to employees who wear respirators when such use is not required by this section or by the employer: On or about December 20, 2016, the employer did not provide the information in Appendix D of this section to employees who wear filtering facepiece respirators when welding metal for metal fabrication.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1026 D01
- Issued
- Jun 13, 2017
- Abate by
- Jul 31, 2017
- Penalty
- Initial $0 · Current $0
0689
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): On or about December 20, 2017, the employer did not determine employee exposure to chromium (VI) when engaged in tasks such as welding on stainless steel metal.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Jun 13, 2017
- Abate by
- Jul 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about December 6, 2016, at the above addressed jobsite, the employer did not develop a written hazard communication program for employees who use hazardous chemicals such as, but no limited to, flammable compressed gases, filler metals that produce hazardous fumes, and hazardous chemical solutions, to fabricate metal products.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at C.A. Precision, INC.
View C.A. Precision, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341988160.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.