Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RASPAN INCORPORATED

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RASPAN INCORPORATED in 4115 N. LINCOLN AVE., CHICAGO, IL 60618 (NAICS 238140). OSHA activity number 341991255.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Raspan Incorporated — free Get an email when a new federal OSHA severe-injury report for Raspan Incorporated is published. One employer, no account, unsubscribe in one click.
Establishment
RASPAN INCORPORATED
Site address
4115 N. LINCOLN AVE.
City
CHICAGO
State
IL
ZIP
60618
Mailing
3904 W. BARRY ST. APT. 4, CHICAGO, IL 60618
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
8
Ownership type
A

4 citations on file for this inspection.

1910.178 L05

Other-than-serious 1 instance 1 exposed
Issued
May 3, 2017
Abate by
May 15, 2017
Penalty
Initial $5,070 · Current $1,500 Reduced
29 CFR 1926.602(d):  The employer did not certify that each operator had been trained and evaluated as required by Paragraph 29 CFR 1910.178:    29 CFR 1910.178(l)(5):  If an operator has previously received training in a topic specified in paragraph (l)(3) of this section, and such training is appropriate to the truck and working conditions encountered, the employer did not evaluate the operator's operation of the vehicle  and found the operator to be competent to operate the truck safely.    (a) On or about December 21, 2016, the employer provided employees with a Gradall 544D-10 rough terrain forklift without ensuring they were competent to operator the equipment safety, as demonstrated by successful completion of forklift training and evaluation.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (O) $1500
  • — Z (S) $5070

1926.20 B02

Serious Gravity 10 1 instance 9 exposed
Issued
May 3, 2017
Abate by
May 15, 2017
Penalty
Initial $5,070 · Current $2,608 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):    a)  On or about December 21, 2016, the employer did not initiate a program which provided for frequent and regular inspections of the job site by a competent person.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2607.5
  • — Z (S) $5070

1926.503 A01

Serious Gravity 5 1 instance 8 exposed
Issued
May 3, 2017
Abate by
May 15, 2017
Penalty
Initial $3,622 · Current $2,618 Reduced
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:     a)  On or about December 21, 2016, employees were exposed to fall hazards while performing masonry work and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize those hazards.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $2617.5
  • — Z (S) $3622

1926.502 D06 I

Serious Gravity 5 1 instance 8 exposed
Issued
May 3, 2017
Abate by
May 15, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.502(d)(6)(i): A snaphook not designed for such use was engaged directly to webbing, rope or wire rope:  a)  On December 21, 2106, employees were using a personal fall arrest life line that  had its locking snaphook engaged back onto the life line rope.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341991255.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.