MOONACHIE, NJ —
OSHA Inspection: MANE CONCEPT, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MANE CONCEPT, INC. in 24 EMPIRE BLVD, MOONACHIE, NJ 07074 (NAICS 424990). OSHA activity number 341994820.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MANE CONCEPT, INC.
- Site address
- 24 EMPIRE BLVD
- City
- MOONACHIE
- State
- NJ
- ZIP
- 07074
- Mailing
- 24 EMPIRE BLVD, MOONACHIE, NJ 07074
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424990
- Employees
- 45
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.176 B
- Issued
- Feb 6, 2017
- Penalty
- Initial $3,803 · Current $1,902 Reduced
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: (a) Throughout entire warehouse: The employer did not ensure that materials stacked on shelves was stored properly to prevent collapse. Improperly stored materials exposed employees to struck-by and caught under hazards due to falling boxes from shelves, on or about December 22, 2016.
Recent events (2)
- — I (S) $1901.5
- — Z (S) $3803
1910.36 G02
- Issued
- Feb 6, 2017
- Penalty
- Initial $8,873 · Current $4,437 Reduced
General-duty citation text
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points. (a) Throughout the facility: Various exit access pathways were not at least 28 inches wide, on or about December 22, 2016
Recent events (2)
- — I (S) $4436.5
- — Z (S) $8873
1910.36 G04
- Issued
- Feb 6, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.36(g)(4): Objects that projected into the exit route reduced the width of the exit route to less than the minimum width requirements of exit routes: (a) Throughout the entire facility: Boxes that were placed in exit access aisles reduced the width of the exit to less than the the minimum width ( 28" ) requirements of exit routes, on or about December 22, 2016.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G01 II
- Issued
- Feb 6, 2017
- Penalty
- Initial $4,310 · Current $2,155 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: (a) Panel #3: Access to the circuit breaker panel in the back of the warehouse was blocked by stacked boxes. The employer did not ensure that there was sufficient access to the circuit breaker panel, on or about 01/03/2017
Recent events (2)
- — I (S) $2155
- — Z (S) $4310
1910.303 F02
- Issued
- Feb 6, 2017
- Penalty
- Initial $3,803 · Current $1,902 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a) In Electric Panel #2A: The employer failed to ensure that all circuit breakers in the panel were labeled properly indicating their purpose, on or about December 22, 2016.
Recent events (2)
- — I (S) $1901.5
- — Z (S) $3803
1910.304 F02 II
- Issued
- Feb 6, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.304(f)(2)(ii): The employer did not ensure that each protective device shall be capable of detecting and interrupting all values of current that can occur at its location in excess of its trip setting or melting point; (a) Computer Main Panel : Breaker on electric panel was locked in closed position by a screw placed to hold it. Conditions prevent the breaker from tripping to open in case of overcurrent creating fire and other electrical hazards, on or about December 22, 2016.
Recent events (2)
- — I (O) $0
- — Z (S) $8873
1910.36 D01
- Issued
- Feb 6, 2017
- Penalty
- Initial $6,339 · Current $3,170 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: (a) Side exit door: The fire exit door contained a locking mechanism on the inside of the door. The locking mechanism needed to be unlocked by hand in order to exit, on or about December 22, 2016.
Recent events (2)
- — I (S) $3169.5
- — Z (S) $6339
1910.176 C
- Issued
- Feb 6, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.176(c): Storage areas were not kept free from accumulation of materials that constituted hazards from tripping: (a) Throughout entire warehouse: The employer did not ensure that walkways and aisles were kept clean and free of debris. Employees are exposed to tripping hazards due to accumulated materials and improperly stored materials in common walkways, on our about 12/22/2016.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Mane Concept, INC.
View Mane Concept, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 424990)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 341994820.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.