Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MATIC HYDRAULICS, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of MATIC HYDRAULICS, INC. in 15-40 127TH STREET, COLLEGE POINT, NY 11356 (NAICS 332710). OSHA activity number 342000791.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Matic Hydraulics, INC. — free Get an email when a new federal OSHA severe-injury report for Matic Hydraulics, INC. is published. One employer, no account, unsubscribe in one click.
Site address
15-40 127TH STREET
City
COLLEGE POINT
State
NY
ZIP
11356
Mailing
15-40 127TH STREET, COLLEGE POINT, NY 11356
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
5
Ownership type
A

4 citations on file for this inspection.

1910.1200 E01

Other-than-serious 1 instance 4 exposed
Issued
May 15, 2017
Abate by
Jun 30, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): Employer had not developed, implemented, and maintained a written hazard communication program included in the requirements outlined in 29 CFR 1910.1200(e)(1)(I) and (e)(1)(ii):  (a) On or about December 29, 2016 in the machine shop at 15-40 127th Street, College Point, NY 11356  Employer had not developed a written hazard communication program while employees using hazardous chemicals including, but not limited to, Klean Strip Paint Thinner (Stoddard solvent) and Rust-Oleum Gloss Protective Enamel (acetone) while performing work duties.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F08

Other-than-serious 1 instance 4 exposed
Issued
May 15, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(8): The employer did not label portable containers into which hazardous chemicals were transferred from labeled containers, and which were not intended only for the immediate use of the employee who performs the transfer.   (a) On or about December 29, 2016 in the machine shop at 15-40 127th Street, College Point, NY 11356  Secondary containers into which hazardous chemicals including, but not limited to, Klean Strip Paint Thinner (Stoddard solvent) and Rust-Oleum Gloss Protective Enamel (acetone), were not labeled.   WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 4 exposed
Issued
May 15, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in workplace:   (a) On or about December 29, 2016 in the machine shop at 15-40 127th Street, College Point, NY 11356  Employer did not maintain and provide to employees for use, copies of the required material safety data sheets for each hazardous chemical while employees working with hazardous chemicals including, but not limited to, Klean Strip Paint Thinner (Stoddard solvent) and Rust-Oleum Gloss Protective Enamel (acetone), while performing work duties in the machine shop.  WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 4 exposed
Issued
May 15, 2017
Abate by
Jun 30, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): The employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area:   (a) On or about December 29, 2016 in the machine shop at 15-40 127th Street, College Point, NY 11356  Employer did not provide hazardous communication training to employees who used hazardous chemicals including, but not limited to, Klean Strip Paint Thinner (Stoddard solvent) and Rust-Oleum Gloss Protective Enamel (acetone), while performing work duties in the machine shop.   WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Matic Hydraulics, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342000791.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.