LAFAYETTE, LA —
OSHA Inspection: GLOBAL MANUFACTURING OF ACADIANA, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GLOBAL MANUFACTURING OF ACADIANA, INC. in 101 ROW 1, LAFAYETTE, LA 70501 (NAICS 332911). OSHA activity number 342013737.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLOBAL MANUFACTURING OF ACADIANA, INC.
- Site address
- 101 ROW 1
- City
- LAFAYETTE
- State
- LA
- ZIP
- 70501
- Mailing
- P. O. BOX 80534, LAFAYETTE, LA 70508
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332911
- Employees
- 18
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- May 9, 2017
- Abate by
- May 23, 2017
- Penalty
- Initial $3,622 · Current $3,622
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: On or about December 15, 2016, the employer did not develop an energy control (lockout/tagout) program for employees who perform preventative maintenance and/or set up work on equipment such as, but not limited to, pneumatic and electric CNC machines.
Recent events (1)
- — Z (S) $3622
1910.179 G01 IV
- Issued
- May 9, 2017
- Abate by
- May 23, 2017
- Penalty
- Initial $5,070 · Current $5,070
General-duty citation text
29 CFR 1910.179(g)(1)(iv): Multiple conductor cable was used with a suspended pushbutton station, but the station was not supported in some satisfactory manner that protected the electrical conductors against strain: On or about December 15, 2016, building 106 repair shop, a pendant control box for a one ton overhead crane was damaged.
Recent events (1)
- — Z (S) $5070
1910.179 J02
- Issued
- May 9, 2017
- Abate by
- May 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2): The items listed in subparagraphs (j)(2)(i)-(vii) were not inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, and all deficiencies were not carefully examined and a determination made as to whether they constituted a safety hazard. On or about December 15, 2016, building 106 repair shop, frequent inspections of overhead crane(s) were not conducted for identifying defects, including but not limited to, damaged operating control pendant(s).
Recent events (1)
- — Z (S) $0
1910.253 B02 IV
- Issued
- May 9, 2017
- Penalty
- Initial $5,070 · Current $5,070
General-duty citation text
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use: On or about December 15, 2016, building 108, west corner: Compressed gas cylinder(s) not in use or connected for use were stored without protective caps.
Recent events (1)
- — Z (S) $5070
More inspections at Global Manufacturing of Acadiana, INC.
View Global Manufacturing of Acadiana, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332911)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342013737.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.