Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RYCON CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RYCON CONSTRUCTION, INC. in 2634 SW EDGARCE STREET TIRE KINGDOM STORE 036, PORT SAINT LUCIE, FL 34953 (NAICS 236220). OSHA activity number 342019403.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rycon Construction, INC. — free Get an email when a new federal OSHA severe-injury report for Rycon Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2634 SW EDGARCE STREET TIRE KINGDOM STORE 036
City
PORT SAINT LUCIE
State
FL
ZIP
34953
Mailing
2501 SMALLMAN STREET SUITE 100, PITTSBURGH, PA 15222
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.1053 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 17, 2017
Penalty
Initial $5,070 · Current $2,500 Reduced
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:    On or about January 11, 2017, at the above addressed site, employees performing cosmetic stripe decoration  installation from an exterior overhang of a building were exposed to a fall hazard of approximately 12 feet 8 inches when stepping on the top and top step of a 12 foot A-frame ladder while gaining access to and from that overhang.
Recent events (3)
  • — F (S) $2500
  • — C (S) $5070
  • — Z (S) $5070

1926.1060 A

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 17, 2017
Abate by
Aug 28, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards:     On or about January 11, 2017, at the above addressed site, employees exposed to a fall hazard when using a ladder to gain access to and from a work level approximately 12 feet 8 inches in height  were not provided with a training program by the employer that would enable them to recognize the hazards associated with using ladders.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.503 A01

Other-than-serious 1 instance 3 exposed
Issued
Feb 17, 2017
Abate by
Aug 28, 2017
Penalty
Initial $5,070 · Current $2,500 Reduced
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    On or about January 11, 2017, at the above addressed site, employees exposed to a fall hazard when performing work while positioned approximately 12 feet 8 inches in height were not provided with a training program by the employer that would enable them to recognize the hazards associated with falls.
Recent events (3)
  • — F (O) $2500
  • — C (S) $5070
  • — Z (S) $5070

1926.501 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 17, 2017
Penalty
Initial $10,140 · Current $7,000 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:      On or about January 11, 2017, at the above addressed site, employees performing cosmetic stripe decoration installation from an exterior overhang of a building were exposed to a fall hazard of approximately 12 feet 8 inches while not being protected from falling to that lower level. .     Rycon Construction, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(1), which was contained in OSHA inspection number 1102727, citation number 1, item number 1 and was affirmed as a final order on 12/02/2015, with respect to a workplace located at Morrow Park Apartments, Baum Boulevard, Pittsburgh, Pennsylvania.
Recent events (3)
  • — F (S) $7000
  • — C (R) $10140
  • — Z (R) $10140

1910.178 L04 III

Other-than-serious 1 instance 1 exposed
Issued
Feb 17, 2017
Abate by
Aug 28, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:    On or about January 11, 2016, at the above addressed site, an employee operating a rough terrain forklift did not have certification for the operation of that lift that was current and issued within the prior 3 years.
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

View Rycon Construction, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342019403.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.