WEST FARGO, ND —
OSHA Inspection: GLENN'S BODY REPAIR, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of GLENN'S BODY REPAIR, INC. in 680 7TH AVENUE NE, WEST FARGO, ND 58078 (NAICS 811121). OSHA activity number 342022159.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLENN'S BODY REPAIR, INC.
- Site address
- 680 7TH AVENUE NE
- City
- WEST FARGO
- State
- ND
- ZIP
- 58078
- Mailing
- 680 SEVENTH AVENUE NE, WEST FARGO, ND 58078
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 18
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.134 C
- Issued
- Jun 6, 2017
- Abate by
- Jun 30, 2017
- Penalty
- Initial $2,173 · Current $1,087 Reduced
13779965P125
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: (a) On or about January 11, 2017 for an employee exposed to respiratory hazards while spray applying chemicals including but not limited to, PPG Urethane Hardener GXH1080 containing hexamethylene diisocyanate oligomers (CAS # 28182-81-2) in a spray booth wearing a 3M M-300 full face supplied air respirator at 680 Seventh Avenue NE in West Fargo, ND. Abatement Note: A minimally acceptable respiratory protection program shall include all of the following requirements: 1. Written standard operating procedures governing the selection and use of respirators shall be established. 2. Only approved respirators shall be used. Respirators shall be selected on the basis of hazards to which the worker is exposed. 3. Respirators must be provided free-of-charge where respirators are needed to protect the health of the employees. 4. Employers must provide (free-of-charge) a medical evaluation to determine each employee's fitness to wear a respirator before initial use. 5. Before initial respirator use, fit testing is required for all employees using negative or positive pressure tight-fitting respirators where such respirators are required by OSHA or where the employer requires the use of such a respirator. 6. The user shall be instructed and trained in the proper use of respirators and their limitations. 7. Surveillance of work area conditions and degree of employee exposure or stress shall be conducted. 8. Employer must ensure the use of respirators where respirators are needed to protect the health of the employees. 9. Respirators shall be regularly cleaned and disinfected to keep them in a sanitary condition. 10. Respirators shall be stored in a clean and sanitary location to prevent damage and contamination. 11. Respirators shall be inspected during cleaning and repaired when necessary. 12. There shall be regular inspection and evaluation to determine the continued effectiveness of the program. 13. Compressed breathing air must meet at least the requirements for Grade D breathing air. 14. The employer must establish and retain medical evaluations and fit-testing records.
Recent events (2)
- — I (S) $1086.5
- — Z (S) $2173
1910.134 E01
- Issued
- Jun 6, 2017
- Abate by
- Jun 30, 2017
- Penalty
- Initial $0 · Current $0
1073137715399965C326
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was required to use the respirator in the workplace: (a) On or about January 11, 2017 for an employee exposed to respiratory hazards while spray applying chemicals including but not limited to, PPG Urethane Hardener GXH1080 containing hexamethylene diisocyanate oligomers (CAS # 28182-81-2) in a spray booth wearing a 3M M-300 full face supplied air respirator at 680 Seventh Avenue NE in West Fargo, ND.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Glenn'S Body Repair, INC.
View Glenn'S Body Repair, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342022159.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.