GRAND RAPIDS, OH —
OSHA Inspection: LAKEWOOD SPECIALTY PRODUCTS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LAKEWOOD SPECIALTY PRODUCTS, LLC in 13020 BOX RD., GRAND RAPIDS, OH 43522 (NAICS 321920). OSHA activity number 342025228.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LAKEWOOD SPECIALTY PRODUCTS, LLC
- Site address
- 13020 BOX RD.
- City
- GRAND RAPIDS
- State
- OH
- ZIP
- 43522
- Mailing
- 13020 BOX RD., GRAND RAPIDS, OH 43522
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 4
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 P01
- Issued
- Mar 28, 2017
- Abate by
- Apr 13, 2017
- Penalty
- Initial $2,173 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): a. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 12, 2017, the employer did not ensure that the Hyster forklift (model H65XM; s/n H177B14633W) was removed from service during a time in which it was not in safe operating condition. Employees were exposed to struck-by injuries in that the horn was not operative.
Recent events (2)
- — I (S) $0
- — Z (S) $2173
1910.213 C01
- Issued
- Mar 28, 2017
- Abate by
- Apr 6, 2017
- Penalty
- Initial $2,716 · Current $879 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, employees operating the Grizzly Industrial table saw (model G0715P; s/n 130046-17-HB) were exposed to amputation hazards in that the saw was not equipped with a hood guard.
Recent events (2)
- — I (S) $879
- — Z (S) $2716
1910.213 C02
- Issued
- Mar 28, 2017
- Abate by
- Apr 6, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, employees operating the Grizzly Industrial table saw (model G0715P; s/n 130046-17-HB) to rip lumber were exposed to struck-by hazards in that the saw was not equipped with a spreader device.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Mar 28, 2017
- Abate by
- Apr 6, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, employees operating the Grizzly Industrial table saw (model G0715P; s/n 130046-17-HB) to rip lumber were exposed to struck-by hazards in that the saw was not equipped with an anti-kickback device.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 H01
- Issued
- Mar 28, 2017
- Abate by
- Apr 6, 2017
- Penalty
- Initial $2,716 · Current $878 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed: a. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, the employer did not ensure that the Delta radial saw (s/n 90H56841) was equipped with a self-adjusting guard that protected the operator from the lower portion of the blade. b. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, the employer did not ensure that the Delta Rockwell radial saw (s/n CG4875) was equipped with a self-adjusting guard that protected the operator from the lower portion of the blade.
Recent events (2)
- — I (S) $878
- — Z (S) $2716
1910.213 H04
- Issued
- Mar 28, 2017
- Abate by
- Apr 6, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: a. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, the employer did not ensure that the Delta radial saw (s/n 90H56841) was equipped with a return device, or installed in a manner, so that the cutting head returned to the starting position when released. b. Lakewood Specialty Products, LLC - Grand Rapids, Ohio: On or about January 13, 2017, the employer did not ensure that the Delta Rockwell radial saw (s/n CG4875) was equipped with a return device, or installed in a manner, so that the cutting head returned to the starting position when released.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Lakewood Specialty Products, LLC
View Lakewood Specialty Products, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342025228.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.