BOISE, ID —
OSHA Inspection: ALEXANDER CLARK INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALEXANDER CLARK INC. in 10801 EMERALD STREET, BOISE, ID 83713 (NAICS 323111). OSHA activity number 342041670.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALEXANDER CLARK INC.
- Site address
- 10801 EMERALD STREET
- City
- BOISE
- State
- ID
- ZIP
- 83713
- Mailing
- 10801 EMERALD STREET, BOISE, ID 83713
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 44
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 A02 II B
- Issued
- Apr 13, 2017
- Abate by
- Jul 13, 2017
- Penalty
- Initial $4,310 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(a)(2)(ii)(B): An employee was required to place a part of his or her body into an area on a machine or piece of equipment where work was actually performed upon the material being processed (point of operation) and where an associated danger zone existed during a machine operating cycle. a) Plant 1: On or about January 19, 2017 and at times prior thereto; a pressman was making adjustments to the Didde Glaser, Inc., web press Model 176-702, SN 302-80 while using a hand tool and placing his hands into a danger zone associated with a the machine operating cycle. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $4310
1910.147 C06 I
- Issued
- Apr 13, 2017
- Abate by
- Jul 13, 2017
- Penalty
- Initial $0 · Current $2,155
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedures at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Production Areas: On or about January 19, 2016 and at times prior thereto; the employer did not conduct an annual review of the LOTO procedures for their printing presses to include their inventory of web presses, collators, binders and cutters. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (S) $2155
- — Z (S) $0
1910.147 C07 I
- Issued
- Apr 13, 2017
- Abate by
- Jul 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) On or about January 19, 2017 and at times prior thereto; LOTO procedures were not employed while the Didde press operator was performing daily operator level maintenance to include oiling of parts and rollers and minor adjustments while machine guards were not in place and hands/fingers were in close proximity to nip points, and machine was operating. Note* Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Apr 13, 2017
- Abate by
- May 31, 2017
- Penalty
- Initial $4,310 · Current $2,155 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machine whose operation exposed an employee to injury, was not guarded: a) Shop 2: On or about January 19, 2017 and at times prior thereto; A Delta 12' Drill Press, SN that was modified to use as a paint mixer did not have a guard affixed to the point of operation that would prevent an operators fingers or hand from being caught in the drill attachment. note * Abatement certification IS required for this item.
Recent events (2)
- — I (S) $2155
- — Z (S) $4310
More inspections in this industry (NAICS 323111)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342041670.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.